New products

All new products

Suppliers

Newsletter

https://50caliberracing.com/288-thickbox_default/117cc-stroker-kit-6-for-honda-50-s-and-70-s.jpg View full size

117cc stroker kit 6 for honda 50's and 70's

$569.00

Add to cart

Shipping Rates

Availability: OUT OF STOCK & ON BACK ORDER

4448A25

This kit is the complete kit to convert your stock motor into a powerful open class 117cc engine!

More details

117cc Stroker Kit 6

This kit is the complete kit to convert your stock motor into a powerful open class 117cc engine (much more powerful than the common Chinese 107 and 125cc engines) with tons of torque! Also, this crank was made specifically for the newer engines and thus, you will not have any fitment issues like trimming the piston skirts in order to clear the crank or the piston not lining up with the cylinder deck. The kit includes the following parts:

- 51mm Crankshaft with NTN bearings
- Race Head – Larger valves and porting for increased performance. Also has bigger cooling fins. Includes all necessary parts. Comes disassembled.
- High performance race camshaft
- Lightweight 54mm aluminum cylinder with steel sleeve, cast in mounts for skid plates, and larger cooling fins.
- High compression piston with rings, pin, & clips
- Crankcase and clutch cover gaskets
- Head gasket kit
- 24mm Performance Carb
- Intake Kit
- Jet kit with 10 different sizes (kit not pictured - recommend starting with a #100 or #105 with the 117 kit)
- Throttle Cable
- Air Filter

As with all 117cc kits on the market, installation requires engine disassembly and case boring. Therefore, we highly recommend a professional technician install this kit and the cases bored by a reputable machine shop. If you plan on installing the kit yourself, you will need to have a Clymer or Honda shop manual. Instructions do not come with the kits but the installation of the crankshaft is just like installing a stock Honda crankshaft and both manuals cover this. You should also have the following parts:

- High volume oil pump
- Oil Cooler (we do not carry these at the moment)
- CR8HSA spark plug (not required, but recommended)

Note: If you have one of our Manual Clutch kits, there has been no long term testing to see how it will hold up to the additional power with this new 117 kit. If you purchased one of our Manual Clutch Kits prior to 6/30/05, will recommend purchasing the Upgrade Disk Kit that is available in this section of the Catalog. Additionally, we do not recommend the use of an inner rotor kit with this clutch (on a 108cc or larger engine) as it can lead to premature clutch failure due to extra fatigue placed on the clutch housing. Also, do not tighten the clutch nut with a hammer and screw driver - it must be torqued on!

    • Red Billet Twist Throttle
      Red 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50, Pit...
       
      $29.99 Add to cart
    • Fuel Line by the foot 3/16 ID - 3/8" OD
      Fuel Line by the Foot  3/16 ID - 3/8 inch OD
       
      $6.00 Add to cart
    • Silver Billet Twist Throttle
      Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50, Pit...
       
      $29.99 Add to cart
    • Carbon Fiber Billet Twist Throttle
      Carbon Fiber Billet Twist Throttle
      Carbon Fiber 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50...
       
      $26.99 Add to cart
    • Oversized Foot Pegs
      Oversized Foot Pegs
      Oversized Foot Pegs for Honda Pit Bikes One pair of Oversized Foot Pegs for all Honda pit bikes and all Chinese knock offs. Includes both right and left pegs. Oversized larger foot platform...
       
      $0.00 Add to cart