- Welcome (Log in)
- Your Account
- Cart: (empty)
Cart
Product
(empty)
-
CALL US TODAY 1-702-889-1741 Dealers Wanted!
Categories
List of products by supplier: 50 Caliber Racing
We manufacture a large variety of pitbike and UTV parts, big bore kits, beadlock wheels, lighting, and much much more.
-
-
AvailableTube Clamp 11/16" Wide for 1.75" OD Roll Bar
Split Collar Tube Clamp 11/16" Wide 1.75" I.D. - for Fabricating Bolt-on AccessoriesTube clamp for adding on after thought accessories, weldable steel split collar tube clamp. CNC machined for accurate fit with protective oil coating that can be directly welded on. * Price is for one clamp -
AvailableUniball Bearing Fabrication Kit - .5"...
50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application. Be sure to... -
AvailableUniball Spherical Bearings - .5" to 1.5" Bore
50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application. Be sure to choose bearing size before ordering! -
AvailableUniversal Dash Switch Panel
Custom CNC Billet Aluminum OR Black 4 Switch Dash Panel Only Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA! -
-
Weld In Bung - 1.25" OD .120 Wall...
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded ThroughHeavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25"... -
AvailableWet Clutch Assembly - Grizzly 660
Wet Clutch Assembly for Yamaha Rhino and Grizzly 660 Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail. Fits the following Yamaha models: - Rhino YXR 660 (2004-2007) - Grizzly YFM 660 (2002-2008) -
AvailableWet Clutch Drum Housing with Fixed Primary...
Primary Wet Clutch Drum Housing with Fixed Primary Sheave for Yamaha 660 Rhino and Grizzly Aftermarket replacement primary wet clutch drum housing with fixed sheave for your Yamaha 660 Grizzly or Rhino. Manufactured to OEM spec for an exact fit. All parts come with a warranty and free tech support. -
AvailableWheel Spacer 4x137 1 inch 12x1.25 Kawasaki...
50 Caliber Racing 4x137mm 12x1.25mm Thread Pitch 1.0" Thick Wheel Spacer - Kawasaki Teryx Need some more clearance or a wider stance for your Teryx? Designed to fit the all Kawasaki Teryx 2 and 4 door models. Available in various widths so you can get the exact fit for your specific needs. Price is for one wheel... -
AvailableWheel Spacer 4x137 2 inch 10x1.25mm stud
Price is for 1 single wheel spacer50 Caliber 2 inch wheel spacers 4x137mm with 10x1.25 pitch stud - 6061 Billet Aluminum - 2 inch thick - nuts to mount spacer to vehicle included - Easy installation - Fits Canam Maverick and all 4x137 patterns using 10x1.25 pitch studs -
AvailableWheel Spacer 4x156 1 inch - 12x1.5 Studs
Price is for 1 single wheel spacer50 Caliber 1 inch wheel spacer 4x156mm with 12x1.5 studs - 6061 Billet Aluminum - 1 inch thick - nuts to mount spacer to vehicle included - Easy installation - Fits 2013+ ranger or xp1000 with 12x1.5 studs -
AvailableWheel Spacer 5 x 5 Inch (5 x 127mm)
50 Caliber Racing - 5 x 5 Inch (5 x 127 metric) Wheel Spacer - Will fit most vehicles with 5 x 5 inch bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widthsPrice is for a single wheel spacer. Please choose size and quantity before ordering -
AvailableWheel Spacer 5 x 5.5 Inch
50 Caliber Racing - 5 x 5.5 Inch (5 x 139.7 metric) Wheel Spacer - Will fit most vehicles with 5 x 5.5 bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
AvailableWheel Spacer 5x150mm 14x150 stud
50 Caliber Racing - 5x150mm Wheel Spacer - Will fit most vehicles with 5x150mm bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
AvailableWheel Spacer 6 x 5.5 Inch 12mm Stud
50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs - Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
Wheel Spacer 8x170mm 14x1.5mm Studs
50 Caliber Racing - 8x170mm Wheel Spacer - Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information - Available in 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
AvailableWheel Spacer 8x170mm 14x2mm Studs
50 Caliber Racing - 8x170mm Wheel Spacer - Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information - Available in 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
AvailableWheel Spacer 8x6.5 Inch 9/16" studs
50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer - Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widthsPrice is for a single wheel spacer.Please choose size and quantity before ordering -
-
AvailableXP Turbo CNC Billet Radius Rods
Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25"... -
AvailableXP1000 1 Piece Center Dash Panel - Lime...
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This price is for the bottom center piece only. -
AvailableXP1000 2 Piece Dash Panel Kit Only - White
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA! -
AvailableXP1000 2 Piece Dash Panel Kit with...
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
Follow us