Home

Best sellers

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • A-Pillar Pod Light Mount Brackets for Arctic Cat Wildcat

    A-Pillar Pod Light Mount Brackets for Arctic Cat...

    Price $34.99

    A-Pillar Pod Light Mount Brackets for Arctic Cat Wildcat

    50 Caliber Racing A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Arctic Cat Wildcat. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel with black powder coat finish.
  • XP1000 3 piece Dash Panel (Only) Red

    XP1000 3 piece Dash Panel (Only) Red

    Price $204.99

    3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!


    This is the complete kit that includes all 3 panels only
  • 88cc stage 1 Vintage big bore kit for honda z50, ct70, atc70, trx70, sl70, xl70

    88cc stage 1 Vintage big bore kit for honda z50,...

    Price $155.00

    Vintage Stage 1 88cc Big Bore kit (52mm bore)

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • Uniball Spherical Bearings - Chromoly Steel

    Uniball Spherical Bearings - .5" to 1.5" Bore

    Price $39.99

    50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!
  • Polaris RZR XP1000 Radius Light Bar Bracket Combo with 40" Radius Light Bar

    Polaris RZR XP1000 Radius Light Bar Bracket Combo...

    Price $249.99

    Radius LED Light Bar Mounting Bracket COMBO for Polaris RZR XP1000 and S 900 - Includes mounting brackets and 40" Curved Light Bar

    Fits the following Polaris models:

    - XP 1000 (2014 - up)
    - Trail 900 (2015 - up)
    - High Performance S 900 (2015 - up)
    - Trail 900 XC (2015 - up)
  • Complete Bolt on 686cc Big Bore Kit for 660 Rhino Raptor and Grizzly
    • Out-of-Stock

    Yamaha Rhino 686cc Big Bore Kit

    Price $229.99

    Yamaha Rhino 686cc Big Bore Kit 2004-2007 (top end cylinder kit)

    Bolt on 102mm 686cc Big Bore Kit for all Yamaha Rhino Raptor and Grizzly 660 models. This is a complete bolt on kit with everything you need. Breathe new life into your Yamaha with our high quality, affordable and reliable big bore kit!
  • Flat Lug Nuts
    • Out-of-Stock

    Lug Nuts Flat 12x1.25 17mm Hex - 16 Pack

    Price $22.00

    50 Caliber Racing Chrome 12 x 1.25mm Flat Base Lug Nuts for ATV / UTV wheels - Set of 16

    - Kawasaki Teryx and Yamaha YXZ1000R - 12 x 1.25mm Thread Pitch - 17mm Hex - 32mm Length - 20mm Diameter Flange
  • 50 Caliber Racing Nautical Star On/Off LED Rocker Switch

    50 Caliber Racing Nautical Star On/Off LED Rocker...

    Price $19.99

     50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!
  • Rocker Switch On/Off/On Blue

    Rocker Switch On/Off/On

    Price $16.50

    On/Off/On Rocker Switch-  50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.


  • 15x8 Beadlock wheel 4x156 .190 3/5 offset Black
    • On sale!

    502 Billet Aluminum Beadlock wheel Black

    Price $499.99

    50 Caliber Racing's 502 Machined Beadlock Wheels


    - Available in 15x8 & 15x10
    - True beadlock wheel
    - 5/3 offset for 8" and 5/5 offset for 10"
    - 6061 heat treated aluminum
    - .190 thickness
    - Machined billet Aluminum 3 piece wheel
    - Double rolled inside lip for added strength
    - Powder coat finish
    - wheel weight 8" 20lbs, 10" 21lbs
  • Heavy Duty Adjustable Ball Joint Polaris RZR XP1000 2014+

    Heavy Duty Adjustable Ball Joint Polaris RZR XP1000...

    Price $59.99

    Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.
  • 3/4" 4 Link Kit Chromoly Heim - 1.5" OD Tubing and high misalignment spacers included

    4 Link Rod End Kit - 3/4" Chromoly Heim - 1.5" OD...

    Price $179.99

    50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • Rod End Kit - Single Joint - 5/8 Chromoly Heim - 1.25 OD Tubing Dimensions - With Optional Misalignment Spacers

    Single Joint Rod End - 5/8 Chromoly Heim - 1.25 OD...

    Price $32.99

    Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • Will fit anything requiring 28 spokes 10in. wheels

    Honda CRF & XR 50 Aluminum Rims

    Price $0.00

    50 Caliber Racing Pit Bike 10 inch Rim for Honda CRF & XR 50


    High quality 6061 Aluminum Pit Bike Rims with 28 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 motorcycles
  • 50 Cal's Yamaha Rhino 660cc Performance CDI box

    Yamaha Rhino Grizzly 660 CDI

    Price $129.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine.