Active filters
50 Caliber Robby Gordon Orange Madness Polaris RZR Sticker Kit
DISCONTINUED
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
50 Caliber Racing - Polaris RZR Standard red sticker kit for 50 caliber 2 seat RZR Doors.
Can-Am X3 Bump Seat with Harness
50 Caliber Racing Bump Seat for the Can-Am X3 is the perfect upgrade to get the entire family having fun together! This seat is made to be mounted in the middle front between driver and passenger or in the back between the rear stock seats.
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/Teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Yamaha Banshee 350 Top End Cylinder Kit 1987-2006
Complete top end rebuild kit for your Yamaha Banshee 350 YFZ350. Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
- 12x10 Beadlock wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- 160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 10.5 lbs
Discontinued
- 12x7 Beadlock wheel
- 4x110mm pattern
- 4/3 offset
- 6061 heat treated aluminum
- 190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11 lbs
Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
Note ** Discontinued.
- 12x10 Beadlock Wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering!
50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look.
Be sure to choose kit size before ordering!
**DISCONTINUED**
- 12x8 Beadlock wheel
- 4x115m pattern
- 4/4 offset
- 6061 heat treated aluminum
- ..190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs
- 12x7 Beadlock wheel
- 4x115mm pattern
- 4/3 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
OEM Replacement Belt for your Scrambler, Hawkeye, Magnum, or Ranger. Best of the Best when it comes to a belt for your Polaris ATV!
NO LONGER SELLING THIS BELT.
**DISCONTINUED**
- 12x8 Beadlock Wheel
- 4x115mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs
