Home

Active filters

  • Categories: 4 & 5 point Harness, Racing Harnesses
  • Categories: ATV Parts & Performance
  • Categories: Automotive
  • Waterproof On/Off Rocker Switch Sexy Design "Head Lights" with Orange LED Illumination

    "Head Lights" On/Off Rocker Switch Waterproof Sexy...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

    "Head Lights"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!
  • 50 Cal's Yamaha Rhino 660cc Performance CDI box

    Yamaha Rhino Grizzly 660 CDI

    Price $129.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

     
  • 4 point harness seat belt with push button release, racing harness

    2" & 3" 4 point Harness with push button release...

    Price $119.99

    50 Caliber Racing's Elite Series 4 Point Harness with Ultra Kush Padding for maximum comfort

    - Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
    - Automotive style buckle with push button release
    - Black anodized hardware
    - Adjustable straps to fit almost anyone
    - Available in 4 point only
    - Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue 

    Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
  • Tie Rod End Kit Honda FL250 Odyssey

    Tie Rod End Kit Honda FL250 Odyssey

    Price $25.00

    Tie Rod End Kit for Honda FL250 Odyssey ATV

    High quality aftermarket tie rod ends from 50 Caliber Racing. This kit will service one side. Includes 1 inner and 1 outer end for the tie rod on your Honda.
  • Rocker Switch On/Off/On Blue

    Rocker Switch On/Off/On

    Price $16.50

    On/Off/On Rocker Switch-  50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.


  • 2" & 3" 4 point harness Seat Belt w/quick release Racing Harness

    2" & 3" 4 point Harness with push button release

    Price $107.99

    50 Caliber Racing 4 Point Harness with black hardware and push button release

    - Available in 2" and 3" wide straps
    - Sewn in pads for maximum comfort
    - Automotive style buckle with push button release
    - Black anodized hardware
    - Adjustable straps to fit almost anyone
    - Available in 4 point only
    - Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green, Purple, Yellow, and Camo

    Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
  • Tie Rod End Kit Kawasaki KVF 750 Brute Force

    Tie Rod End Kit Kawasaki KVF 750 Brute Force

    Price $25.00

    Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV

    High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
  • Elite Series 5.5 inch LED Light Bar - Flood Beam

    Elite Series 5.5 inch LED Light Bar - Flood Beam

    Price $79.99

    Elite Series 5.5 inch LED Bar with Flood Beam


    - Dimensions: 6.75"(L) x 2.7’’(H ) x 3’’(D)
    - Operates on 9-36 Volts DC including 12 and 24 Volts
    - Flood beam - 12 LED bulbs 3 watt each 36 watts total
    - Pivoting mounting system
    - 3600 lumens, 6000k
    - FREE 50 Caliber Koozie with Each light bar order!
  • Curved Light Bar Mount Bracket for 14-15 GM Trucks

    Curved Light Bar Mount Bracket for 14-15 GM Trucks

    Price $54.99

    50" Curved Light Bar Mounting Brackets for 14-15 Chevy and GMC Trucks

    - Strong, sleek, Aerodynamic design
    - Mild Steel Construction
    - Upper windshield mount
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Curved LED Light Bar (5045-A12)
  • 88cc stage 1 Vintage big bore kit for honda z50, ct70, atc70, trx70, sl70, xl70

    88cc stage 1 Vintage big bore kit for honda z50,...

    Price $155.00

    Vintage Stage 1 88cc Big Bore kit (52mm bore)

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • Curved Light Bar Mount Bracket Kit for 10-14 Ford F-150 SVT Raptor

    Curved 50" Light Bar Mount Bracket Kit for 10-14...

    Price $49.98

    50" Curved Light Bar Mounting Brackets for 10-14 Ford F-150 SVT Raptor

    - Strong, sleek, aerodynamic design
    - Mild Steel Construction
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
  • 88cc stage 2 Vintage big bore kit for honda z50, ct70, atc70, trx70, sl70, xl70
    • Out-of-Stock

    88cc stage 2 Vintage big bore kit for honda z50,...

    Price $244.99

    Vintage Stage 2 88cc Big Bore kit

    - Fits 1968-1981 honda z50, ct70, atc70, trx70, sl70, xl70
    - 20mm Carburetor
    - 52mm Piston and cylinder
    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
  • Straight 50" Light Bar Mount Bracket Kit for 10-14 Ford F-150 SVT Raptor

    Straight 50" Light Bar Mount Bracket Kit for 10-14...

    Price $29.99

    50" Straight Light Bar Mounting Brackets for 10-14 Ford F-150 SVT Raptor

    - Strong, sleek, aerodynamic design
    - Mild Steel Construction
    - Brow mount
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Straight LED Light Bar [5040] (not included)
  • 88cc Race Head Vintage big bore kit for honda z50 and ct70
    • Out-of-Stock

    88cc Race Head Vintage big bore kit for honda z50...

    Price $409.99

    50 Caliber Racing Race Head, 88cc Big Bore kit, and 20mm Carburetor

    Our Race Head has been updated for even more performance! It now has 25/22mm valves with better porting/flow. We also kept the combustion chamber the same size and changed the angle of the valves slightly. This will really wake up your stock engine and is comparable in power to the much larger Chinese 124cc engines!
  • Cooling Fan Polaris 600 700 800 Twin
    • Out-of-Stock

    Cooling Fan Polaris 600 700 800 Twin

    Price $95.00

    Polaris 600 700 800 Sportsman Ranger RZR Cooling Fan 2002-2015

    Brand new cooling fan assembly including clips. Manufactured to OEM spec for an exact fit, just remove, replace and ride!

    For Polaris Sportsman 600-800 , Ranger 800, and RZR 800
  • Curved 50" Light Bar Mount Bracket Kit for 9-14 Ford F-150

    Curved 50" Light Bar Mount Bracket Kit for 09-14...

    Price $29.99

    50" Curved Light Bar Mounting Brackets for 09-14 Ford F-150

    - Strong, sleek, aerodynamic design
    - Mild Steel Construction
    - Roof mount
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
  • Complete Bolt on 686cc Big Bore Kit for 660 Rhino Raptor and Grizzly
    • Out-of-Stock

    Yamaha Rhino 686cc Big Bore Kit

    Price $229.99

    Yamaha Rhino 686cc Big Bore Kit 2004-2007 (top end cylinder kit)

    Bolt on 102mm 686cc Big Bore Kit for all Yamaha Rhino Raptor and Grizzly 660 models. This is a complete bolt on kit with everything you need. Breathe new life into your Yamaha with our high quality, affordable and reliable big bore kit!
  • Curved 50" Light Bar Mount Bracket Kit for 04-14 Nissan Titan

    Curved 50" Light Bar Mount Bracket Kit for 04-14...

    Price $29.99

    50" Curved Light Bar Mounting Brackets for 04-14 Nissan Titan

    - Strong, sleek, aerodynamic design
    - Mild Steel Construction
    - Roof mount
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
  • Curved 50" Light Bar Mount Bracket Kit for 07-14 Toyota Tundra

    Curved 50" Light Bar Mount Bracket Kit for 07-14...

    Price $49.96

    50" Curved Light Bar Mounting Brackets for 07-14 Toyota Tundra
    - Strong, sleek, aerodynamic design
    - Mild Steel Construction
    - Roof mount
    - Includes installation hardware
    - Quick easy install
    - Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)