Active filters
50 Caliber Racing - 8x170mm Wheel Spacer
- Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
- Available in 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Tie Rod End Kit for Yamaha ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
Polaris RZR XP1000 Radius Roll Cage. More info below or call us at 702-889-1741 to discuss the details.
50 Caliber Racing - 5x150mm Wheel Spacer
- Will fit most vehicles with 5x150mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Tie Rod End Kit for Yamaha Raptor YFM660 ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
50 Caliber Racing RZR Doors with Slam Latches - Silver Panel with Black Frame
High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
50 Caliber Racing RZR Doors with Slam Latches - Red Panel with Black Frame
High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
Tie Rod End Kit for Honda FL250 Odyssey ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. This kit will service one side. Includes 1 inner and 1 outer end for the tie rod on your Honda.
50 Caliber Racing RZR Doors with Slam Latches - Black Panel with Black Frame
High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
50 Caliber Racing RZR Doors with Slam Latches - White Panel with Black Frame
High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
50" Curved Light Bar Mounting Brackets for 14-15 Chevy and GMC Trucks
- Strong, sleek, Aerodynamic design
- Mild Steel Construction
- Upper windshield mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar (5045-A12)
Vintage Stage 1 88cc Big Bore kit (52mm bore)
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.
50 Caliber Racing Chrome 12 x 1.50mm Flat Base Lug Nuts for ATV / UTV wheels
Prices is for a single lug nut - Please select quantity needed before ordering!
- Fits Polaris RZR XP1000 and more
- 12 x 1.50mm Thread Pitch
- 17mm Hex
- 32mm Length
- 20mm Diameter Flange
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
50" Curved Light Bar Mounting Brackets for 10-14 Ford F-150 SVT Raptor
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
