Home

Active filters

  • Categories: 4 & 5 point Harness, Racing Harnesses
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Weld In Bung - 1" ID Round Tube - 5/8-18 Threaded Through Right hand for custom rod ends fabricate tie rods, 4 link, etc

    Weld In Bung - 1.25" OD .120 Wall Tube - 5/8-18...

    50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

    Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

    Be sure to select thread direction and quantity before ordering!
  • 4 point harness seat belt with push button release, racing harness

    2" & 3" 4 point Harness with push button release...

    Price $119.99

    50 Caliber Racing's Elite Series 4 Point Harness with Ultra Kush Padding for maximum comfort

    - Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
    - Automotive style buckle with push button release
    - Black anodized hardware
    - Adjustable straps to fit almost anyone
    - Available in 4 point only
    - Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue 

    Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
  • Left Hand 1"- 1 3/4" Weld In Bungs

    Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!
  • 2" & 3" 4 point harness Seat Belt w/quick release Racing Harness

    2" & 3" 4 point Harness with push button release

    Price $107.99

    50 Caliber Racing 4 Point Harness with black hardware and push button release

    - Available in 2" and 3" wide straps
    - Sewn in pads for maximum comfort
    - Automotive style buckle with push button release
    - Black anodized hardware
    - Adjustable straps to fit almost anyone
    - Available in 4 point only
    - Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green, Purple, Yellow, and Camo

    Available as Racing harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.
  • Right Hand 1"- 1 3/4" Weld In Bungs

    Right Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!
  • Right Hand Heim 1/2-20

    Chromoly Heim Joints 1/2" - 7/8" RHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 
  • Left Hand 1/2" - 7/8" Heims

    Chromoly Heim Joints 1/2" - 7/8" LHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 
  • Pair of Misalignment Spacers

    High Angle Misalignment Spacers for Heim Joints

    Price $18.99

    High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

    Be sure to choose the correct size and quantity before ordering!
  • Rod End Kit - Single Joint - 5/8 Chromoly Heim - 1.25 OD Tubing Dimensions - With Optional Misalignment Spacers

    Single Joint Rod End - 5/8 Chromoly Heim - 1.25 OD...

    Price $32.99

    Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • Panhard Bar Fab Kit - Shown with Optional High Misalignment Spacers

    Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...

    Price $54.99

    Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • Sway Bar Link Fab Kit - 5/8 Chromoly Heim - 1.25 OD Tubing

    Sway Bar Link Fab Kit - 5/8 Chromoly Heim - 1.25 OD...

    Price $104.99

    50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!