Active filters
Silver 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Head Lights"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
On/Off/On Rocker Switch- 50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
Elite Series 5.5 inch LED Bar with Flood Beam
- Dimensions: 6.75"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood beam - 12 LED bulbs 3 watt each 36 watts total
- Pivoting mounting system
- 3600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
50" Curved Light Bar Mounting Brackets for 14-15 Chevy and GMC Trucks
- Strong, sleek, Aerodynamic design
- Mild Steel Construction
- Upper windshield mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar (5045-A12)
Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"
Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.
Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty.
50" Curved Light Bar Mounting Brackets for 10-14 Ford F-150 SVT Raptor
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.
Be sure to choose the correct size and quantity before ordering!
50" Straight Light Bar Mounting Brackets for 10-14 Ford F-150 SVT Raptor
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Brow mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Straight LED Light Bar [5040] (not included)
13 tooth sprocket fits a 420 chain and has a 20 mm inner shaft hole.
Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
