Active filters
OEM Factory Replacement Primary Clutch for Polaris Ranger RZR 900 2015-2019
Genuine OEM Factory Polaris Part number 1323130
Polaris Primary Drive Clutch part number 1323762. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts. Replaces OEM part #s: 1323762, 1323624,1323534. Fits RS1 2018-2021, Turbo S 2020-21.
50 Caliber Racing 4x137mm 12x1.25mm Thread Pitch 1.0" Thick Wheel Spacer - Kawasaki Teryx
Need some more clearance or a wider stance for your Teryx? Designed to fit the all Kawasaki Teryx 2 and 4 door models. Available in various widths so you can get the exact fit for your specific needs.
Price is for one wheel spacer
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering!
50 Caliber 1 inch wheel spacers 4x137mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1 inch thick
- Lifetime warranty
- Flat profile nuts to mount spacer to vehicle included
- Easy installation
- Fits Can-am Commander, Maverick and all 4x137 patterns using 10x1.25 pitch studs
Price is per spacer
Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.
Front Bumper for Can-Am X3 2016-2021+
Protect your Can-Am with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabbed for a 2 or 3" led pod light, and rubber end caps. 100% made in the USA by 50 Caliber Racing.
RZR XP 900 Heavy Duty Radius Rod Kit (fits both 2 and 4 seat models)
- Solid 6061 CNC Billet Aluminum
- 1.25" Diameter
- 5/8" Chromoly Heim Joints
- CNC engraved Logo on the lower rods only
- Lifetime Warranty on Rods (1 Year warranty on heims)
- Extreme Duty
Available in Raw (no finish) or Black Powdercoat Finish
Be sure to select color and heim joint option before ordering!
Bolt-on Intrusion V Bar For Can-am X3, all models 2016+
Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.
50 Caliber Racing 2" 4 Point Safety Harness
- 2" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.
50 Caliber Racing Custom Hood Bling Panels for RZR XP Turbo / Turbo S. Decorative steel panels with a two tone powdercoat finish, designed to install on hood of your RZR. CNC laser cut for a super precision clean look. These panels will give you a unique, awesome, custom touch that you can't get anywhere else. Stainless fasteners included for a quick, easy installation. Available with red/black or clear over raw/black finish.
Be sure to select color before ordering!
Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.
Be sure to select color before ordering!
50" LED Light Bar Mounting Brackets for Yamaha Viking
Clamp on brackets allow you to brow mount a 50" Straight LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Patented Design
Custom Rear Bumper for Polaris RZR Turbo S
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering!
This convenient fully synthetic oil change kit includes everything you need to change your oil.
LOCAL DEAL ONLY!
Custom vented exhaust cover for Polaris RZR PRO XP. Get rid of the ugly stock plastic rear "bumper" panel and add a more aggressive look to your RZR. Black powdercoat steel frame with honeycomb mesh allows for increased cooling, better departure angles, and some killer unique style. CNC laser cut from thin gauge sheet steel with 50 Caliber Racing logo at the bottom. 100% made in the USA!
Polaris OEM Factory Replacement Seat Base 5450170 for RZR S 900/1000, XP1000, XP Turbo, Turbo S, General. This is a factory original equipment replacement for the seat bases that tend to crack and break over time. This is the base only, it does not include latch. See below for fitment.
50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A
High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing LED Light Bar Mounting Brackets for 2016+ Can-Am X3. USA made bolt on brackets allow you to brow mount a 50" straight LED light bar on your Can-am X3. Purchase brackets only or as a combo with a 50" LED light bar.
Be sure to choose a lighting option before ordering!
