50" Curved Light Bar Mounting Brackets for 04-14 Nissan Titan

- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Roof mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)

50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

50" Curved Light Bar Mounting Brackets for 07-14 Toyota Tundra
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Roof mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)

Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Blower"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Single rod end kit including a 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for ATVs, Go Karts, Racing Lawn Mowers and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "LED Light Bar"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016

Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Roof Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Cooling Fans"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing 12V Wire Harness Kit with Relay and Switch

Universal 12 Volt wire harness kit complete with 40 amp relay, fuse and On/Off switch. This kit will allow you to safely connect a LED Light Bar, Fog Light, Lighted Whip, Pod Lights, or any other 12 volt accessories to your vehicle.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Spot Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design -"Boom Box"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Zombie Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Dome Light"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!