50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

50 Caliber Racing - Polaris RZR Blue Fire sticker kit.

- 12x10 Beadlock Wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs

DISCONTINUED 

50 Caliber HO Orange Madness Polaris RZR Sticker Kit

50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look. 

Be sure to choose kit size before ordering!

 50 Caliber Turbo Silver Polaris RZR Sticker Kit

 DISCONTINUED

50 Caliber Racing 50 inch LED Light Bar

Massive, reliable 12 volt LED lighting at a great price. Featuring 3 watt Cree bulbs and an IP68 waterproof housing. Just what you need for any kind of off road or industrial application.

- UTV and Off Road
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles

Price is for 1 single wheel spacer

50 Caliber 2 inch wheel spacers 4x137mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 2 inch thick
- nuts to mount spacer to vehicle included
- Easy installation
- Fits Canam Maverick and all 4x137 patterns using 10x1.25 pitch studs

50 Caliber Doors RZR 2 Raw with no finish

- 2 Two seat RZR doors
- 6061 Aluminum
- Doors come fully assembled
- Slam Latches included
- Capped nuts for added safety
- Easy installation
- Fits all RZR 2 seat RZRS, XP900, 570, 800, 900
- Stamped 50 Caliber Logo
- 2 Three pieces hinges
- 2 year warranty against manufacturer defects. (warranty does not cover accidents/crashes)

11" Elite Seies LED Light Bar 

- Size: 11.25"(L) x 2.7’’(H ) x 3’’(D)

- Operates on 9-36 Volts DC including 12 and 24 Volts
- Spot beam - 6 LED bulbs 60 watts
- Pivoting mounting system
- 6000 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!

- Size: 8"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam - 18 LED bulbs 3 watt each 54 watts total
- Pivoting mounting system
- 5400 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!

- Size: 16.5"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 5600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!

- Size: 16"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 9000 Lumens - 6000k
- FREE 50 Caliber Koozie with Each light bar order!

50 Caliber Racing - Yellow/White lightning RZR sticker kit 2014.

Horny -  50 Caliber Racing On/Momentary Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

Polaris RZR Xp1000 and 2015 RZR S 900 Light bar rack and 30" LED bar combo

Light bar rack (fits most 30" straight led bars) for your Polaris RZR Xp1000 and RZR S 900. Bolts on to factory cage for 2 or 4 seat models.

DISCONTINUED

Bolt on Billet Grab handle for roll cage or flat surface

**DISCONTINUED**

Discontinued

Radius LED light bar mount system for 2014-Up Can-Am Maverick / Commander

Fits the following Can Am models:

- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)
- Maverick 1000 MAX (2014-up)

Discontinued

Radius LED light bar mount system COMBO for 2014-Up Can-Am Maverick / Commander - Includes mount and light bar

Fits the following Can-Am models:

- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)