Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Spot Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

15 tooth sprocket made for a 428 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes buggy's go karts and many other applications.

Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Zombie Lights"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

15 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Lighted Whip"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched designa and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit atvs, pit bikes, and many other applications.

Rod end fabrication kit with 3/4 x 3/4 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Bilge Pump"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Steel 13 tooth Sprocket for a 420 chain. The shaft opening size is a 17mm opening to the outside walls. Bolt holes are 34mm center to center. This sprocket will fit atv's, pit, bikes, motorcycles, quads, and many other applications.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design  "Auxiliary Battery"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat car truck sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing 47mm Gasket kit for 70cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "GPS"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/Teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Music"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!