Home

Active filters

  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.5" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...

    Price $40.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • 88cc stage 1 big bore kit for honda Z50, xr50 and crf50
    • Out-of-Stock

    88cc stage 1 big bore kit for honda Z50, xr50 and crf50

    Price $155.00

    Stage 1 88cc Big Bore kit for 88-99 Z50, 2000-2020 xr and crf 50's

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • Panhard Bar Fab Kit - 7/8" Heim, 1.5"OD .120 or .250 Wall Bung - Shown with optional high misalignment spacers

    Panhard Bar Fab Kit - 7/8" Chromoly Heim - 1.5" OD...

    Price $79.99

    Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 5 Switch Dash Panel Silver

    5 Switch Dash Panel Silver

    Price $85.00

    5 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP 900. This panel allows you to add additional switches for lights and accessories. Made in the USA!
  • Sway Bar Link Fab Kit - 7/8" Heim, 1.5"OD .120 or .250 Wall Bung - Shown with Optional Misalignment Spacers

    Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.5"...

    Price $144.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • Yamaha Rhino 12x8 Aluminum Spun Beadlock wheel 4x110
    • On sale!

    12x8 Beadlock wheel 4x110 .160 4/4 polished

    Price $99.00

    - 12x8 Beadlock wheel
    - 4x110mm pattern
    - 4/4 offset
    - 6061 heat treated aluminum
    - .160 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Polished finish
    - Reinforcement ring on inside of rim
    - 10.2 lbs

    DISCONTINUED
  • 88cc Race Head Big Bore Kit for honda Z50, xr crf 70, xr50, and crf 50's
    • Out-of-Stock

    88cc Race Head Big Bore Kit for honda Z50, xr crf...

    Price $409.99

    88cc Race head kit for Your Honda 50 or Honda 70. This kit will drastically improve your overall performance on your bike. A stock honda 50 puts around 2.2hp to the ground and this kit will put you between 5.5-6hp to the ground and 30% more to the crank! Kit comes with fully assembled race head, performance cam, 20mm carburetor, and all the other goodies needed to fulfill your need for speed!
  • 4 Link Rod End Kit - 7/8" Heim, 1.5"OD .120 or .250 Wall Bung - Shown with Optional Misalignment Spacers

    4 Link Rod End Kit - 7/8" Chromoly Heim - 1.5" OD...

    Price $264.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 12x10 Beadlock wheel 4 x 110 Yamaha Rhino Wheel
    • On sale!
    • Out-of-Stock

    12x10 Beadlock wheel 4x110 .160 4/6 polished

    Price $99.00

    - 12x10 Beadlock wheel
    - 4x110mm pattern
    - 4/6 offset
    - 6061 heat treated aluminum
    - 160 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Powdercoat finish
    - Reinforcement ring on inside of rim
    - 10.5 lbs
  • 88cc Race Head Vintage big bore kit for honda z50 and ct70
    • Out-of-Stock

    88cc Race Head Vintage big bore kit for honda z50...

    Price $409.99

    50 Caliber Racing Race Head, 88cc Big Bore kit, and 20mm Carburetor

    Our Race Head has been updated for even more performance! It now has 25/22mm valves with better porting/flow. We also kept the combustion chamber the same size and changed the angle of the valves slightly. This will really wake up your stock engine and is comparable in power to the much larger Chinese 124cc engines!
  • Rod End Kit - Single Joint - 7/8-14 x 7/8 bore Chromoly Heim - 1.75" OD Tubing - Shown With Optional Misalignment Spacers

    Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...

    Price $42.99

    Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
  • 12x7 Beadlock utv wheel 4x110 .190 thick
    • On sale!
    • Out-of-Stock

    12x7 Beadlock wheel 4x110 .190 4/3 polished

    Price $99.00

    Discontinued

    - 12x7 Beadlock wheel
    - 4x110mm pattern
    - 4/3 offset
    - 6061 heat treated aluminum
    - 190 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Polished finish
    - Reinforcement ring on inside of rim
    - 11 lbs
  • Panhard Bar Fab Kit - 7/8" Heim, 1.75"OD .120 or .250 Wall Bung - Shown with optional high misalignment spacers
    • Out-of-Stock

    Panhard Bar Fab Kit - 7/8" Chromoly Heim - 1.75" OD...

    Price $82.99

    Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 12x7 Beadlock wheel 4x110mm pattern Powdercoat finish
    • On sale!

    12x7 Beadlock wheel 4x110 .190 4/3 black

    Price $99.00

    Looking for a strong, yet light weight wheel for your UTV? Well this is it! 50 Caliber Aluminum Racing wheel are a spun aluminum wheel with a double rolled edge on the inside of the wheel and a bead lock on the outside.

  • 108cc stroker kit 2 for honda 50's and 70's
    • Out-of-Stock

    108cc stroker kit 2 for honda 50's and 70's

    Price $534.99

    Complete 108cc Stroker kit for Honda crf and xr 50 and 70cc engines 1988 to current. Kit includes piston, race head, cylinder, cam, carburetor, throttle cable, gaskets, intake, crank, and filter.
  • Sway Bar Link Fab Kit - 7/8" Heim, 1.5"OD .120 or .250 Wall Bung - Shown with Optional Misalignment Spacers

    Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.75"...

    Price $149.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
  • 12x8 Aluminum Spun Bead lock 4x110 UTV wheel .190 thickness
    • On sale!

    12x8 Beadlock wheel 4x110 .190 4/4 polished

    Price $99.00

    - 12x8 Beadlock wheel
    - 4x110mm pattern
    - 4/4 offset
    - 6061 heat treated aluminum
    - .190 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Polished finish
    - Reinforcement ring on inside of rim
    - 11.7 lbs

    DISCONTINUED
  • 20mm replacement premium grade carb for honda 50 big bore engines
    • Out-of-Stock

    High Quality 20mm Carburetor for Honda 50 Big bore...

    Price $60.00

    Premium Grade 20mm Performance Aftermarket Carburetor for Honda 50 Pit Bikes with 88cc Big Bore Engines!

    Intake throat diameter: 20mm
    Bolt hole spacing: 48mm
    Air filter mount diameter: 32mm

    Fits:
    - Honda 50 XR50 CRF50 XR70 CRF70 (Sized for 88cc - up Big Bore modified engine. Not recommened for stock engines)