Active filters
-
-
Chromoly Uniball Cups with Snap Ring
Price $25.9950 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering! -
52mm 88cc 110cc 125cc Head gasket and clutch gasket...
Price $18.0052mm 88cc 110cc 125cc Head gasket and clutch gasket kit for Honda 50 and Chinese Lifan motor.
-
Uniball Spherical Bearings - .5" to 1.5" Bore
Price $39.9950 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering! -
Uniball Bearing Fabrication Kit - .5" to 1.5" Bore
Price $32.9950 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering! -
20mm Carburetor for 88cc to 125cc engines
Price $40.0020mm Carburetor for 88cc big bore engine on Honda 50's. This will also fit many pitbikes up to 125cc.
-
Wheel Spacer 8x170mm 14x1.5mm Studs
Price $46.0050 Caliber Racing - 8x170mm Wheel Spacer
- Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
- Available in 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering -
Honda 50/70 High Performance Carburetor and Intake Kit
Price $105.00High Performance 20mm Carburetor and Intake Kit for 50cc/70cc Honda 50/70. This carb should be used on big bore engines, 88cc-125cc.
-
Quick Release Fire Extinguisher Mount
Price $39.9950 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles
-
88cc stage 1 Vintage big bore kit for honda z50,...
Price $155.00Vintage Stage 1 88cc Big Bore kit (52mm bore)
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit. -
2" 4 point Harness Seat Belt 50 Caliber Racing
Price $114.9950 Caliber Racing 2" 4 Point Safety Harness
- 2" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. -
88cc stage 1 big bore kit for honda for xr and crf 70
Price $155.00Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit. -
3" 4 point Harness Seat Belt 50 Caliber Racing
Price $124.9950 Caliber Racing 3" 4 Point Safety Harness
- 3" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. -
3" 5 point Harness Seat Belt 50 Caliber Racing
Price $134.9950 Caliber Racing 3" 5 Point Safety Harness
- 3" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- 5 Point - Includes crotch strap
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. -
-
2 inch LED Pod Lights
Price $99.992 inch LED Pod Lights
50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury. -
-
-
2" & 3" 4 point Harness with push button release
Price $107.9950 Caliber Racing 4 Point Harness with black hardware and push button release
- Available in 2" and 3" wide straps
- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green, Purple, Yellow, and Camo
Available as harness only or with a bypass plug (sold separetely) for Polaris RZR or Can-Am UTVs. -
Rocker Switch On/Off/On Momentary In/Out Winch
Price $16.50On/Off/On Rocker Switch- 50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.