List of products by brand 50 Caliber Racing

50 Caliber Racing Seat Belt Bypass Override Plug for Can-Am Commander, Maverick and X3 UTVs 2010+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Dad Bod Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Rocker Design

"Rock Lights"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Custom Front Bumper for Polaris RZR Pro R

When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Design

"Zombie Face"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Cooling Fans"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

2 inch LED Pod Lights

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.

Heavy Duty Radius Rod Kit for RZR PRO R  / Turbo R 2022+. Fits both 2 and 4 seat models. Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 3/4" chromoly heim joints. This setup is practically bulletproof. Available in raw or powdercoat finish.

Be sure to select finish before ordering!

Heavy duty Sway Bar End Links for Polaris RZR PRO R 2 & 4 seat models. CNC Machined in the USA from solid 6061 billet aluminum and fitted with chromoly PTFE heim joints. These links are as stout as it gets. If you want a bulletproof set up for your RZR, you need these end links! Choose front or rear position. Available in raw aluminum or black powdercoat finish.

Be sure to choose location and finish before ordering!

50 Caliber Racing 30 inch Chase LED Light Bar

50 Caliber Racing's 30 inch chase light is a great solution for off road safety and can also be wired up as a street legal kit. These bars have numerous different preset functions including strobe, flashing, solid colors, etc..., and can be wired up to turn signals, brake lights, running lights, and reverse lights. 

Light info and specs
- 30 inch wide
- Multi function
- Includes wiring and off/on rocker switch
- can be used for race or play applications
- Heavy duty ABS Construction
- Can be used for race or play

50 Caliber Racing 2ft Tall LED lighted whips are super bright and fully programmable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! 

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Strongman Design

"This Switch Turns Something On"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber Racing's 502 Machined Beadlock Wheels

- Available in 15x8 & 15x10
- True beadlock wheel
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs

50 Caliber Racing 4 Point Harness with black hardware and push button release

- Available in 2" and 3" wide straps
- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green, Purple, Yellow, and Camo

Available as harness only or with a bypass plug (sold separetely) for Polaris RZR or Can-Am UTVs.

50 Caliber Racing's 501 Machined Beadlock Wheels 5x4.5 for Polaris ProR & TurboR

- Available in 15x8 & 15x10
- True beadlock wheel
- Aluminum spun 3 piece wheels
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs

50 Caliber Racing's 503 Machined Beadlock Wheels

 - Available in 15x8 & 15x10 Sizes
- True Beadlock wheel 
- 4x156mm pattern
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish 
- Wheel weight 8" 20lbs, 10" 21lbs

Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Comes fitted with 5/8 heat treated 4130 chromoly heim joints. Designed for extreme duty for Polaris Pro R 2 & 4 seat UTVs. If you want a bulletproof setup on your Pro R, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).

Be sure to select finish before ordering!

Quick Release Harness Mount

- Compatible with most 4-point, 5-point, and 6-point harnesses

- Durable construction for maximum strength and longevity

- Secure mounting to chassis or roll cage

- Optimized positioning for comfort and safety

- Lightweight design without compromising durability

- Easy installation with included hardware

- Ideal for racing, off-road, and performance street cars

- Single Pack Coverage: Includes 2 eyebolts, 2 nuts, and 2 clips—enough to mount either the top or bottom of one harness (purchase two packs for full installation).

Important: Will not work with sewn-together harnesses—ensure separate strap ends for proper attachment.

50 Caliber Racing's 504 Machined Beadlock Wheels

- Available in 15x8 & 15x10
- True beadlock wheel
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs

Can-am Beadlock wheels Maverick wheels 6 lug

50 Caliber Racing's Elite Series 4 Point Harness with black hardware and push button release

- Available in 2" and 3" wide straps- Sewn in pads for maximum comfort
- Automotive style buckle with push button release
- Black anodized hardware
- Adjustable straps to fit almost anyone
- Available in 4 point only
- Many designs and colors available: Sugar skulls red and black, Bandana red, black, blue 

Available as harness only or with a bypass plug (sold separately) for Polaris RZR or Can-Am UTVs.