Active filters
Front Bumper for Can-Am X3 2016-2021+
Protect your Can-Am with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabbed for a 2 or 3" led pod light, and rubber end caps. 100% made in the USA by 50 Caliber Racing.
RZR XP 900 Heavy Duty Radius Rod Kit (fits both 2 and 4 seat models)
- Solid 6061 CNC Billet Aluminum
- 1.25" Diameter
- 5/8" Chromoly Heim Joints
- CNC engraved Logo on the lower rods only
- Lifetime Warranty on Rods (1 Year warranty on heims)
- Extreme Duty
Available in Raw (no finish) or Black Powdercoat Finish
Be sure to select color and heim joint option before ordering!
Bolt-on Intrusion V Bar For Can-am X3, all models 2016+
Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.
50 Caliber Racing 2" 4 Point Safety Harness
- 2" wide straps
- Sewn in pads for maximum comfort
- Latch lock system with quick release pull strap
- Adjustable straps to fit almost anyone
- Available in 4 and 5 Point (antisubmarine strap)
- Many colors available: Black, Red, Blue, Silver, Orange, Pink, Green and Purple
Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs.
50 Caliber Racing Custom Hood Bling Panels for RZR XP Turbo / Turbo S. Decorative steel panels with a two tone powdercoat finish, designed to install on hood of your RZR. CNC laser cut for a super precision clean look. These panels will give you a unique, awesome, custom touch that you can't get anywhere else. Stainless fasteners included for a quick, easy installation. Available with red/black or clear over raw/black finish.
Be sure to select color before ordering!
Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.
Be sure to select color before ordering!
50" LED Light Bar Mounting Brackets for Yamaha Viking
Clamp on brackets allow you to brow mount a 50" Straight LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Patented Design
Custom Rear Bumper for Polaris RZR Turbo S
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering!
Custom vented exhaust cover for Polaris RZR PRO XP. Get rid of the ugly stock plastic rear "bumper" panel and add a more aggressive look to your RZR. Black powdercoat steel frame with honeycomb mesh allows for increased cooling, better departure angles, and some killer unique style. CNC laser cut from thin gauge sheet steel with 50 Caliber Racing logo at the bottom. 100% made in the USA!
50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A
High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing LED Light Bar Mounting Brackets for 2016+ Can-Am X3. USA made bolt on brackets allow you to brow mount a 50" straight LED light bar on your Can-am X3. Purchase brackets only or as a combo with a 50" LED light bar.
Be sure to choose a lighting option before ordering!
50 Caliber Racing CNC Laser Cut Side Intake Grilles for Polaris RZR XP Turbo / Turbo S 2017-up. Laser cut from 22 gauge sheet steel, with a two tone powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Available in Red, White, or Clear over Raw powdercoat with Black accent panel.
Be sure to select color and kit size before ordering!
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Dad Bod Design
"This Switch Turns Something On"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
16 Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 12 x 1.25mm Thread Pitch
Be sure to select color before ordering!.
50 Caliber Racing Laser Cut Steel 3 Piece Grille Kit for 2022+ RZR PRO R & Turbo R 2 and 4 seat models
Add a unique honeycomb look to your RZR with our custom laser cut steel grille kit. This is a 3 piece design for the entire front end of the car, which transforms the look of your RZR drastically. Featuring a two tone powdercoat finish, this kit includes stainless steel fasteners. If you want to stand out from the crowd this is the grille for you. Available in Red, White, or Clear over Raw with a Black accent panel.
Be sure to select color before ordering!
- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11 lbs
Custom vented exhaust cover for Polaris RZR Turbo R. Get rid of the ugly stock plastic rear "bumper" panel and add a more aggressive look to your RZR. Black powdercoat steel frame with honeycomb mesh allows for increased cooling, better departure angles, and some killer unique style. CNC laser cut from thin gauge sheet steel with 50 Caliber Racing logo at the bottom. Includes lower brackets. 100% made in the USA!
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This price is for the bottom center piece only.
50 Caliber Racing - 8x170mm Wheel Spacer
- Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
- Available in 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
