Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design -"Boom Box"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for cars, trucks, 4x4, sand rails, Jeeps and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Dome Light"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Rod end fabrication kit with 3/4 x 3/4 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing LED lighted whips are super bright and fully adjustable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! Available in 4 and 6 foot lengths.
Single rod end kit including a 3/4 x 3/4 chromoly heim joint with nylon/Teflon (PTFE) liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Complete top end rebuild kit for your Yamaha Banshee 350 YFZ350. Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Brand new with 1 Year Warranty, 50 Caliber Racing single piston Rear Brake Caliper assembly for your Honda ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads plus assembly hardware shown, however the bracket is not included so you're required to use your current caliper mounting brackets with this Caliper.
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Will fit Raptor, Banshee, Blaster and Warrior. Brand new with 1 Year Warranty, 50 Caliber Racing dual piston Rear Brake Caliper assembly for your Yamaha ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads, mounting bracket and assembly hardware shown.
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Will fit Yamaha Grizzly and Kodiak. Brand new with 1 Year Warranty, 50 Caliber Racing Front Disc Brake Caliper assembly for your Yamaha ATV. Select to purchase Left, Right or both as a pair to replace the factory Front Brake Caliper for the Grizzly or Kodiak. Comes with new Pads, mounting bracket and assembly hardware shown. Manufactured to OEM spec for an exact fit, simply mount the Brake Caliper then attach brake line... remove, replace and ride!
Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Polaris Scrambler 500 Rear Brake Caliper with Pads
50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.
Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
