Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing - 6 x 135mm Wheel Spacer - Ford 6 Lug 1999-2014
- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widths Price is for a single wheel spacer.
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs
- Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information - Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design -"Boom Box"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Dome Light"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look.
