HID Euro 4" Black

Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.

Be sure to select color before ordering!

Upgrade your 2 or 4 seat Wildcat with a 50 Caliber Racing middle seat, made just for kids 60 lbs or less! Designed to mount over the middle bump between stock seats. Quick and easy installation. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from. Front position on 4 seat models bolts right in, 2 Seater and rear of 4 seater models will require the purchase of a harness bar (sold separately).

Be sure to select harness color before ordering!

This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.

Brand new with 1 Year Warranty, 50 Caliber Racing Rear Brake Caliper assembly for the Yamaha Rhino YXR 700. Select to purchase Left, Right or both as a pair to replace the factory Rear Brake Caliper for your Rhino. They come fully assembled including Pads with mounting bracket as a complete and direct replacement for Part numbers: 5B4-2580V-00-00 and 5B4-2580W-00-00.

Custom Front Bumper for Polaris RZR XP1000 and S 900

When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.

Fits the following Polaris models:

- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018)

16 Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 12  x  1.25mm Thread Pitch

Be sure to select color before ordering!.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

50 Caliber Racing CNC Bullet Shifter Knob for Arctic Cat Wildcat

Give your Wildcat a unique look with our custom CNC milled shift knob with .50 Caliber Racing engraved. Designed to look like a .50 Caliber Bullet, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA.

50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs

- Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

- 12x8 Beadlock Wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED

Brand New Polaris OEM Factory Replacement Front Gearcase differential 1337177. This is a genuine factory OEM part from Polaris. Brand new, not rebuilt. Fits Polaris RZR PRO R 2022+.

Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

Be sure to select harness color before ordering!

Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar