Active filters
50 Caliber Racing Chrome 12 x 1.25mm Flat Base Lug Nuts for ATV / UTV wheels - Set of 16
- Kawasaki Teryx and Yamaha YXZ1000R - 12 x 1.25mm Thread Pitch - 17mm Hex - 32mm Length - 20mm Diameter Flange
50 Caliber Racing Gas Tank for Yamaha PW80 Pit Bikes All Years
Bolt on Billet Grab handle for roll cage or flat surface
**DISCONTINUED**
On/Off/On Rocker Switch- 50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
Jet Kit for 20mm carb jets included 82/85/87/90/92/95
We now offer our own brand Jet Kit! Put the following reference number in the search bar: [4211A1]
.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
Now you can take the whole family on UTV adventures! Upgrade your 2 & 4 Seat RZR PRO R/Turbo R with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
50 Caliber Racing's 502 Machined Beadlock Wheels
- Available in 15x8 & 15x10
- True beadlock wheel
- 5/3 offset for 8" and 5/5 offset for 10"
- 6061 heat treated aluminum
- .190 thickness
- Machined billet Aluminum 3 piece wheel
- Double rolled inside lip for added strength
- Powder coat finish
- wheel weight 8" 20lbs, 10" 21lbs
Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.
50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Solid Steel Extended Spike Lug Nuts - 14x2.0mm Thread Size
Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 24 and 32 lug nuts, with several colors to match any color scheme.
Be sure to select kit size and color before ordering!
50 Caliber Racing Momentary ON/OFF Rocker Switch
High quality 50 Caliber Racing super bright Illuminated ON/OFF Momentary Rocker Switches are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Carburetor for Suzuki LT80 Quadsport ATV
50 Caliber Racing Carburetor for the Suzuki Quadsport LT80. Why bother with trying to rebuild your old Carb when you could buy a replacement to upgrade your ATV saving you time and money... you'll be back to riding in no time!
50 Caliber Racing Pit Bike 10 inch Rim for Honda CRF & XR 50
High quality 6061 Aluminum Pit Bike Rims with 28 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 motorcycles
Yamaha Wolverine 350 Top End Cylinder Kit 1995-2005
Complete top end rebuild kit for your Yamaha Wolverine 350 ATV! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
- 12x8 Beadlock Wheel
- 4x137mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs
50 Caliber Racing Quick fit 4/5-Point Harness — Built tough with EZ-adjust hardware for fast, precise adjustments. Ultra Kush padding delivers plush, pressure-free comfort for long sessions on the asphalt, trail, or track. Available in 2" or 3" straps with a wide fit range to suit almost any driver. Race-style latch/pull release and black anodized hardware give you secure, premium performance. Choose 4- or 5-point setups and match your style with colors like Sugar Skulls (Red/Black), Black, Red, Gold, Dark Green, Lime Green, Hot Pink, Bright Orange, or Purple.
Bolt-on Intrusion V Bar For Can-am X3, all models 2016+
Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.
Stock Replacement Handle Bars for Honda CT70 KO, Z50, K1 & k2 through 1978
