Best sellers
-
-
Bolt-on Dash Intrusion V- Bar for Can-am X3
Price $249.99Bolt-on Intrusion V Bar For Can-am X3, all models 2016+
Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing. -
4 Link Rod End Kit - 7/8" Chromoly Heim - 1.5" OD...
Price $264.99Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
4 Link Rod End Kit - 5/8 Chromoly Heim - 1.25 OD Tubing
Price $159.99Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Rear Brake Caliper Yamaha Rhino 700
Price $89.99Brand new with 1 Year Warranty, 50 Caliber Racing Rear Brake Caliper assembly for the Yamaha Rhino YXR 700. Select to purchase Left, Right or both as a pair to replace the factory Rear Brake Caliper for your Rhino. They come fully assembled including Pads with mounting bracket as a complete and direct replacement for Part numbers: 5B4-2580V-00-00 and 5B4-2580W-00-00.
-
- On sale!
Tie Rod End Kit Yamaha Raptor YFM660 ATV
Price $14.50Tie Rod End Kit for Yamaha Raptor YFM660 ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits. -
Rocker Switch Momentary Horny
Price $21.99Horny - 50 Caliber Racing On/Momentary Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
-
XP1000 6 Switch Dash Panel (Only) Red
Price $159.996 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
-
Max flow radiator grill for your Polaris RZR 800 and...
Price $60.00**DISCONTINUED**
RZR Max Flow Radiator Grill
- Fits RZR Xp 900 & 800 models
(doesnt fit all 800's. Make sure your front end matches the picture below)
- 20% more air to your radiator
- Matte Black Powder Coat Finish
- Steel construction
- Everything included for simple install
- FREE 50 Caliber Koozie with order! -
-
50 Caliber complete plastics kit
Price $50.00Full Aftermarket Plastic Kit
Honda xr50(2002+)Honda crf50 (all years)
On sale for limited time! Blow out item!This is a complete plastics kit with all pieces needed. There are lots of plastic kits out there now with no fork leg covers. This kit includes every piece you need to replace stock plastics.
-
-
Black Billet Twist Throttle
Price $29.99Black 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
-
Sway Bar Link Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $88.99Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $49.99Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
12 Way Standard LED Circuit Screw Fuse Block
Price $31.9912 Way Standard LED Circuit Screw Fuse Block with Ground Terminals
This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible. -
Bullet Racing Shift Knob for Wildcat
Price $59.9950 Caliber Racing CNC Bullet Shifter Knob for Arctic Cat Wildcat
Give your Wildcat a unique look with our custom CNC milled shift knob with .50 Caliber Racing engraved. Designed to look like a .50 Caliber Bullet, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA. -
Wheel Spacer 6 x 5.5 Inch 14mm Stud
Price $28.0050 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 14mm Studs
- Will fit most 88 - Up GM vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering -
Illuminated Dual USB Rocker Switch
Price $16.50Illuminated 50 Caliber Racing Dual USB Rocker Switch - USB Type A
High quality 50 Caliber Racing backlit dual USB rocker switch allows you to charge you iPod, cell phone and other mobile devices. Operates on 12-24 Volts and outputs 5V at 3.1 Amps. Waterproof, durable switches are perfect for your boat car truck sand rail or UTV!
Be sure to select the correct color before ordering! -
CNC Roll Cage and Bumper Insert/End Caps 1.75"
Price $45.00Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095