SFI Approved 2" and 3" 5 Point Harness, Racing Harness
50 Caliber Racing Harness 2" and 3" 5 Point Harness are designed with a quick release latch system and are SFI approved for racing.
50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.
Be sure to choose bearing size before ordering!
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
Single rod end kit including a 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building custom linkage, tie rods and more for ATVs, Go Karts, Racing Lawn Mowers and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!
Custom Front Bumper for Polaris RZR XP1000 2019+, XP Turbo (does not fit Turbo S)
Protect your RZR with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabs for 11" Elite light bar, and CNC machined end caps.
Be sure to choose color before ordering!
This 2 piece Dash Panel Kit will allow you to custom mount 2 switches on the dash panel of the Polaris RZR 170. Our 6061 Billet Aluminum CNC Dash Panels are machined here at 50 Caliber Racing and were designed to give your RZR that unique custom look!
50 Caliber Racing Momentary Rocker Switch laser etched design "Horn"
High quality 50 Caliber Racing Illuminated Momentary Horn Rocker Switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
- 12x6 Beadlock wheel
- 4x156mm pattern
- 4/2 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095
Tie Rod End Kit for Yamaha ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
50 Caliber Racing Elite Series 6 inch Spot Beam 36 Watt LED Light Bar
You won't believe how much throw these lights have! 50 Caliber Racing Elite Series lighting with deep cone optics cranks out 2X the output of typical automotive LED light bars. These lights mean business!
- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles
Replacement 27mm Carburetor for Honda Fourtrax Recon TRX250
- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
DISCONTINUED
- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs
Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.
Be sure to select color before ordering!
Upgrade your 2 or 4 seat Wildcat with a 50 Caliber Racing middle seat, made just for kids 60 lbs or less! Designed to mount over the middle bump between stock seats. Quick and easy installation. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from. Front position on 4 seat models bolts right in, 2 Seater and rear of 4 seater models will require the purchase of a harness bar (sold separately).
Be sure to select harness color before ordering!
Custom CNC Billet Air Intake Grille Bezels for Polaris RZR PRO XP. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.
Be sure to select color before ordering!
This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
