Best sellers
Active filters
-
-
Air Intake Bezel Polaris RZR XP1000 2014+
Price $129.99Custom CNC Billet Air Intake Grille Bezels for Polaris RZR XP1000. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.
-
Ride Command XP1000 1 Piece Dash Panel
Price $55.00This is a 1 Piece Bottom Center Dash Panel for the the 2017 Polaris RZR XP1000 Ride Command Edition.
-
RZR XP1000 Tie Rod Set 2015-2017.5 Heavy Duty
Price $229.99RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering! -
Rear Brake Caliper for Yamaha Raptor
Price $64.99Will fit Raptor, Banshee, Blaster and Warrior. Brand new with 1 Year Warranty, 50 Caliber Racing dual piston Rear Brake Caliper assembly for your Yamaha ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads, mounting bracket and assembly hardware shown.
-
Universal Dash Panel With Switches
Price $0.00Custom CNC Billet Aluminum 4 Switch Dash Panel
Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA! -
Arctic Cat Wildcat LED Light Bar Mounting Brackets...
Price $110.0040" LED Light Bar Mounting Brackets for Arctic Cat Wildcat
Clamp on brackets allow you to mount a 40" Curved LED light bar on your Arctic Cat Wildcat. USA made from 1/8" steel plating with a gloss black powdercoat finish. These brackets will bolt directly onto your factory cage and give you more than enough lumens to light up your life!
-
50 Caliber Racing On/Off 420 Leaf LED Rocker Switch
Price $19.99Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering! -
"Dome Light" On/Off Rocker Switch Waterproof Sexy...
Price $21.9950 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Dome Light" Girl
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering! -
XP1000 3 piece Dash Panel Only - White
Price $204.993 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels only
-
Can-Am Maverick 2015 2 Seat X DS Turbo Harness Mounts
Price $109.99Safety Harness Mount Brackets for 2015 Can-Am Maverick X DS Standard or Turbo
Finally a 4 point harness solution for your X DS standard or turbo Maverick! These brackets bolt straight to your frame, allowing you to mount 4 and 5 point harnesses.
For Maverick X DS Platform Turbo and Non Turbo models -
Tie Rod End Kit Kawasaki KVF 750 Brute Force
Price $25.00Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits. -
XP1000 6 Switch Dash Panel Blue
Price $179.996 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
-
"No Fat Chicks" On/Off Rocker Switch Waterproof Sexy...
Price $19.9950 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"No Fat Chicks"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering! -
Elite Series 16.5 inch LED Light Bar
Price $149.99- Size: 16.5"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 5600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order! -
32 inch Remote Controlled LED Light Bar CA Legal
Price $320.00These remote control Led Lights are the latest led lights on the market.
- Size: 32"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Light is Large Center Spot Only, Flood Only, or both Spot and Flood Combo
- Removable Black Plastic Cover - California Street Legal Led Light
- Pivoting mounting system
- 158 watts total
- FREE 50 Caliber Koozie with Each light bar order! -
22 inch Remote Controlled LED Light Bar CA Legal
Price $250.00These remote control Led Lights are the latest led lights on the market.
- Size: 22"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Light is Spot Only, Flood Only, or both Spot and Flood Combo
- Remote Control Key Chain Fob
- Removable Black Plastic Cover - California Street Legal Led Light
- 132 Watts Total
- FREE 50 Caliber Koozie with Each light bar order -
-
50cal bolt glue 50ml/thread locker
Price $15.0050cal 271 High Strength RED Bolt Glue 50ml bottle high strength threadlocker. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
-
Quick Release Harness Mount
Price $19.99Quick Release Harness Mount
- Compatible with most 4-point, 5-point, and 6-point harnesses
- Durable construction for maximum strength and longevity
- Secure mounting to chassis or roll cage
- Optimized positioning for comfort and safety
- Lightweight design without compromising durability
- Easy installation with included hardware
- Ideal for racing, off-road, and performance street cars
- Single Pack Coverage: Includes 2 eyebolts, 2 nuts, and 2 clips—enough to mount either the top or bottom of one harness (purchase two packs for full installation).
Important: Will not work with sewn-together harnesses—ensure separate strap ends for proper attachment.