Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat

Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more!  Available as roof rack only, or you can add light bar and pod lights for a complete system. 

Be sure to select lighting option before ordering!

Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.

This fits the 2016 Commander models ONLY.

Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

50 Caliber Racing - 6 x 135mm  Wheel Spacer - Ford 6 Lug 1999-2014

- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.

Please choose size and quantity before ordering

Horny -  50 Caliber Racing On/Momentary Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Shocker"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This is for 1 bottom center plate only.

Price is for 1 single wheel spacer

50 Caliber 1.5 inch wheel spacers 4x156mm with 12x1.5 studs

- 6061 Billet Aluminum
- 1.5 inch thick
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits Polaris 2013+ ranger, 2015 S900 and all xp1000's

2 x 26x9x12 inch
2 x 26x11x12 inch

50 Caliber Racing 6 ply Radial off road racing tires. These tires are great for all terrains. 6 ply are extremely hard to blow out or punture. The non-directional pattern provides predictable cornering and claws up roots and rocks, creating optimum climbing confidence.

- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs

DISCONTINUED

 50 Caliber Robby Gordon Orange Madness Polaris RZR Sticker Kit

 DISCONTINUED

50 Caliber Racing Laser Cut Steel 3 Piece Grille Kit for 2022+ RZR PRO R & Turbo R 2 and 4 seat models

Add a unique honeycomb look to your RZR with our custom laser cut steel grille kit. This is a 3 piece design for the entire front end of the car, which transforms the look of your RZR drastically. Featuring a two tone powdercoat finish, this kit includes stainless steel fasteners. If you want to stand out from the crowd this is the grille for you. Available in  Red, White, or Clear over Raw with a Black accent panel.

Be sure to select color before ordering!

Custom Rear Bumper for Polaris RZR Turbo S

Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.

Be sure to choose color before ordering!

50 Caliber Racing Heavy Duty Rear Plate for Can-Am X3 and X3 MAX

Toss your flexy, stamped stock rear plate and replace it with our heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your X3, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Made from 1/8 thick steel plate with black powdercoat finish. 

Universal 6 Way Covered 12V Screw Fuse Box Block with Ground Terminals

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

Polaris XP1000 HD 7075 Aluminum Sprague Carrier/Front Differential Roller Cage

This is a heavy duty performance upgrade hardened aluminum Roller Cage. Our 7075 aluminum Cages are practically bulletproof and will be the last one you ever need to buy.

Cage only - rollers and springs not included.

Elite Series 34" Combo Beam 108 Watt LED Light Bar with Mounting Brackets for Yamaha YXZ1000R 2016-2019

You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Combo Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars so these lights mean business! Mounting Brackets to fit Yamaha YXZ1000R are included.

Discontinued

50 Caliber Racing - 4 x 137 Wheel Spacer - 12x1.5mm Stud for Can-am X3 and Honda Talon. CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x137 with 12x1.5mm studs will fit Can-Am X3 and Honda Talon. Includes lug nuts.

Please choose size and quantity before ordering. Price is for a single wheel spacer.