- Size: 16"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 9000 Lumens - 6000k
- FREE 50 Caliber Koozie with Each light bar order!

**DISCONTINUED**

- 12x7 Beadlock wheel
- 4x137mm pattern
- 4/3 offset
- 6061 heat treated aluminum
-.190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs

**DISCONTINUED**

- 12x10 Beadlock wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 10.5 lbs

Note ** Discontinued.

- 12x10 Beadlock Wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs

- 12x8 Beadlock Wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs

DISCONTINUED

Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar

12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

A-Pillar Pod Light Mount Brackets for Polaris RZR 170

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.

Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!

Custom CNC Billet Aluminum OR Black 4 Switch Dash Panel Only

Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA!

Billet Aluminum CNC Roll Cage/Bumper End Caps fits 1.75" tubing .095

XP900 Roll Cage LED Light Bar Mount Rack and 30" LED light bar COMBO

DISCONTINUED

Includes mount and light bar. Bolts on to factory cage for 2 or 4 seat models.

Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Accessories"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles

Price is for a single wheel spacer.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

Procom Yamaha Rhino 700 Performance CDI box. This fully reprogrammable high performance ECU is a direct plug-in-&-go type, not a piggyback.

DISCONTINUED

- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing heavy duty chromoly uniball spherical bearings with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

Be sure to select thread direction and quantity before ordering!

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Rock Lights" with Sexy Girl

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!