Home

Best sellers

Active filters

  • 8 Inch Spot Beam 54 Watt LED Light Bar

    Elite Series 9.5 Inch Spot Beam 54 Watt LED Light Bar

    Price $99.99

    50 Caliber Racing Elite Series 9.5 inch Spot Beam 54 Watt LED Light Bar
    DISCONTINUED

    You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Spot Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars. These lights mean business!



    - ATV and UTV
    - 4x4 and Off Road
    - Sand Rail / Dunes
    - Snow Plow
    - Construction
    - Heavy Equipment
    - Farm Equipment
    - Towing
    - Emergency Response Vehicles
  • XP1000 3 piece Dash Panel (Only) Blue

    XP1000 3 piece Dash Panel (Only) Blue

    Price $204.99

    3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!


    This is the complete kit that includes all 3 panels only
  • RZR XP1000 3 piece 6 Switch Dash Panel Silver

    RZR XP1000 3 piece (only) Dash Panel Silver

    Price $194.99

    3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!


    This kit includes the 3 dash panels only (NO Rocker switches)
  • 88cc stage 1 big bore kit for honda for xr and crf 70

    88cc stage 1 big bore kit for honda for xr and crf 70

    Price $155.00

    Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years

    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (can still run pump gas)
    - Head gasket kit includes all gasket needed to install bore kit.
  • 50 Cal's Yamaha Rhino 660cc Performance CDI box

    Yamaha Rhino Grizzly 660 CDI

    Price $119.99

    50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

    Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

     
  • Kawasaki Teryx 12x10 Beadlock wheel 4/6 offset 4x137mm pattern
    • On sale!
    • Out-of-Stock

    12x10 Beadlock wheel 4x137 .190 4/6 polished

    Price $99.00

    **DISCONTINUED**


    - 12x10 Beadlock Wheel
    - 4x137mm pattern
    - 4/6 offset
    - 6061 heat treated aluminum
    - .190 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Polished finish
    - Reinforcement ring on inside of rim
    - 12.5 lbs
  • 12x7 Beadlock wheel 4x110mm pattern Powdercoat finish
    • On sale!

    12x7 Beadlock wheel 4x110 .190 4/3 black

    Price $99.00

    Looking for a strong, yet light weight wheel for your UTV? Well this is it! 50 Caliber Aluminum Racing wheel are a spun aluminum wheel with a double rolled edge on the inside of the wheel and a bead lock on the outside.

  • 12x10 Beadlock wheel 4 x 110 Yamaha Rhino Wheel
    • On sale!
    • Out-of-Stock

    12x10 Beadlock wheel 4x110 .160 4/6 polished

    Price $99.00

    - 12x10 Beadlock wheel
    - 4x110mm pattern
    - 4/6 offset
    - 6061 heat treated aluminum
    - 160 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Powdercoat finish
    - Reinforcement ring on inside of rim
    - 10.5 lbs
  • .50 Caliber Extended Swingarms Kit 1
    • Out-of-Stock

    .50 Caliber Extended Swingarms Kit 1

    Price $499.00

    DISCONTINUED

    Fits Honda xr50 and crf50 and many chinese Pit Bikes

     

    This is our new 3+ swingarm. We call it the big bike swingarm because thats what will have after you add this. Rides incredible compared to stock style swingarms and delivers 9 inches of wheel travel. This is the biggest bang for the buck when it comes to swingarms for your 50.
  • Honda Trail Bikes HD Auto Clutch Assembly
    • Out-of-Stock

    Trail Bikes HD Auto Clutch

    Price $85.00

    Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50
  • XP1000, Turbo & RS1 Heavy Duty Rear Plate Fits the new RS1 model!

    XP1000, Turbo & RS1 Heavy Duty Rear Plate

    Price $49.99

    Heavy Duty Rear Plate for Polaris RZR XP1000, Turbo and RS1

    Toss your flexy, stamped stock rear plate and replace it with our heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your RZR, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other exteme driving conditions. Available with no finsh (raw) or black powdercoat.

    Be sure to select your RZR year and finish before ordering!
  • Wheel Spacer 8 x 6.5 Inch

    Wheel Spacer 8x6.5 Inch 9/16" studs

    Price $50.00

    50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer

    - Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • XP1000 6 Switch Dash Panel ONLY Orange

    XP1000 6 Switch Dash Panel (Only) Orange

    Price $159.99

    6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
  • RZR 800 Front Bumper

    Polaris RZR 570, 800, 900 Front Bumper

    Price $179.99

    - Fits all RZR models 570, 800, s, Xp 900
    - Made from 1.5" steel tubing
    - Protects your RZR while giving it a nice look!
    - Powdercoat finish
    - Everything included for simple install
    - FREE 50 Caliber Koozie with order!

  • 12x10 Beadlock wheel 4x110 .190 4/6 black
    • On sale!

    12x10 Beadlock wheel 4x110 .190 4/6 black

    Price $99.00

    - 12x10 Beadlock Wheel
    - 4x110mm pattern
    - 4/6 offset
    - 6061 heat treated aluminum
    - .190 thickness
    - Polished billet aluminum beadlock ring
    - Added security and strength
    - Powdercoat finish
    - Reinforcement ring on inside of rim
    - 12.5 lbs
  • 15x8 Beadlock wheel 4x156 .190 3/5 offset Black
    • On sale!

    502 Billet Aluminum Beadlock wheel Black

    Price $499.99

    50 Caliber Racing's 502 Machined Beadlock Wheels


    - Available in 15x8 & 15x10
    - True beadlock wheel
    - 5/3 offset for 8" and 5/5 offset for 10"
    - 6061 heat treated aluminum
    - .190 thickness
    - Machined billet Aluminum 3 piece wheel
    - Double rolled inside lip for added strength
    - Powder coat finish
    - wheel weight 8" 20lbs, 10" 21lbs
  • Off Road Childrens Booster Seat

    Off Road Child Booster Seat

    Price $199.99

    50 Caliber Racing Off Road Booster Seat with Harness Slot


    When you are out off roading with the family the safety of your children comes first. The last thing you want your child to be doing is to be bouncing around your adult size stock seat. This booster seat is secure and comfortable and it features suspension seat webbing, thick bolsters, & a 5th point harness slot to keep your child safe & snug in the seat. Price is for one seat. Harness sold separately.

     

    This item cannot ship to a PO Box