50 Caliber Racing - 8x6.5 Inch (8 x 165.1 metric) Wheel Spacer
- Will fit most vehicles with 8x6.5" bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
50 Caliber Racing Elite Series 9.5 inch Spot Beam 54 Watt LED Light Bar
DISCONTINUED
You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Spot Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars. These lights mean business!
- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels only
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This kit includes the 3 dash panels only (NO Rocker switches)
Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.
20mm Carburetor for 88cc big bore engine on Honda 50's. This will also fit many pitbikes up to 125cc.
**DISCONTINUED**
- 12x10 Beadlock Wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 12.5 lbs
Looking for a strong, yet light weight wheel for your UTV? Well this is it! 50 Caliber Aluminum Racing wheel are a spun aluminum wheel with a double rolled edge on the inside of the wheel and a bead lock on the outside.
- 12x10 Beadlock wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- 160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 10.5 lbs
DISCONTINUED
Fits Honda xr50 and crf50 and many chinese Pit Bikes
This is our new 3+ swingarm. We call it the big bike swingarm because thats what will have after you add this. Rides incredible compared to stock style swingarms and delivers 9 inches of wheel travel. This is the biggest bang for the buck when it comes to swingarms for your 50.
Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50
50 Caliber Racing RZR Doors with Slam Latches - Black Panel with Black Frame
High quality front hinge doors for your RZR 570 800 and 900. Made from 6061 aluminum these doors are light weight and strong. They include reliable slam latches with capped nuts for added safety. These doors come fully assembled are easy to install and they open in the direction of a traditional car door.
Bolt-on Intrusion V Bar For Can-am X3, all models 2016+
Protect your passengers with our heavy duty welded steel bolt-on intrusion V-bar. Provides extra bracing and support for the weakest area of the stock cage. It also stiffens the chassis, providing rollover protection, and blocks large objects from entering through your windshield. 100% hand-built in the USA by 50 Caliber Racing.
Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Off Road Booster Seat with Harness Slot
When you are out off roading with the family the safety of your children comes first. The last thing you want your child to be doing is to be bouncing around your adult size stock seat. This booster seat is secure and comfortable and it features suspension seat webbing, thick bolsters, & a 5th point harness slot to keep your child safe & snug in the seat. Price is for one seat. Harness sold separately.
This item cannot ship to a PO Box
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
- 12x10 Beadlock Wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
Can-Am Maverick X3 Heavy Duty Tie Rod Kit (fits 2 & 4 seat models)
Custom tie rod kit. Machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated, teflon lined 4130 chromoly heim joints. These are the strongest rods you can get for your X3, they are practically bulletproof!
Be sure to select the correct size & finish before ordering!
