Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.

Be sure to select harness color before ordering!

Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar

A-Pillar Pod Light Mount Brackets for Polaris RZR 170

A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.

Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!

Heavy Duty Tie Rod Kit for Polaris XP900 (fits 2 & 4 seat models)

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud

- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles

Price is for a single wheel spacer.

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

DISCONTINUED

- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs

50 Caliber Racing CNC Laser Cut Side Intake Grilles for Polaris RZR XP Turbo / Turbo S 2017-up. Laser cut from 22 gauge sheet steel, with a two tone powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Available in Red, White, or Clear over Raw powdercoat with Black accent panel.

Be sure to select color and kit size before ordering!

50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through

Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread. 

Be sure to select thread direction and quantity before ordering!

Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat

Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more!  Available as roof rack only, or you can add light bar and pod lights for a complete system. 

Be sure to select lighting option before ordering!

5" Bolt on CNC Billet Aluminum Mirrors that fit 2" tubing. Set of two mirrors for driver side and passenger side. 

Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.

This fits the 2016 Commander models ONLY.

Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).

Be sure to select finish before ordering!

Wet Clutch Assembly for Yamaha Rhino and Grizzly 660

Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.

Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)

LED Light Bar Mounting Bracket COMBO for Yamaha Rhino - Includes Brackets and 50" Straight LED Light Bar

50 Caliber Racing - 6 x 135mm  Wheel Spacer - Ford 6 Lug 1999-2014

- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.

Please choose size and quantity before ordering

Replacement 20mm Carburetor for Yamaha PW80

RZR XP 900 Heavy Duty Radius Rod Kit (fits both 2 and 4 seat models)

- Solid 6061 CNC Billet Aluminum
- 1.25" Diameter
- 5/8" Chromoly Heim Joints
- CNC engraved Logo on the lower rods only
- Lifetime Warranty on Rods (1 Year warranty on heims)
- Extreme Duty
Available in Raw (no finish) or Black Powdercoat Finish

Be sure to select color and heim joint option before ordering!

Tie Rod End Kit for Suzuki LT250 ATV

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Eject A Ho"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!