Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar
A-Pillar Pod Light Mount Brackets for Polaris RZR 170
A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.
Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!
This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles
Price is for a single wheel spacer.
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
DISCONTINUED
- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat
Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for a complete system.
Be sure to select lighting option before ordering!
Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories
Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.
This fits the 2016 Commander models ONLY.
Heavy Duty Tie Rod Kit for Polaris XP900 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016
Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.
Custom Front Bumper for Polaris RZR XP1000 and S 900
When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.
Fits the following Polaris models:
- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018)
Wet Clutch Assembly for Yamaha Rhino and Grizzly 660
Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.
Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)
LED Light Bar Mounting Bracket COMBO for Yamaha Rhino - Includes Brackets and 50" Straight LED Light Bar
50 Caliber Racing - 6 x 135mm Wheel Spacer - Ford 6 Lug 1999-2014
- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Tie Rod End Kit for Suzuki LT250 ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Eject A Ho"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This price is for the bottom center piece only.
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Eject Passenger"
Single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
