Best sellers
Active filters
-
-
Billet Rear Grille Bezels Can Am X3 2 and 4 seat models
Price $129.99Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.
Be sure to select color before ordering! -
Arctic Cat Wildcat Bump Seat with Harness
Price $279.99Upgrade your 2 or 4 seat Wildcat with a 50 Caliber Racing middle seat, made just for kids 60 lbs or less! Designed to mount over the middle bump between stock seats. Quick and easy installation. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from. Front position on 4 seat models bolts right in, 2 Seater and rear of 4 seater models will require the purchase of a harness bar (sold separately).
Be sure to select harness color before ordering! -
RZR PRO XP Billet Air Intake Bezels
Price $129.99Custom CNC Billet Air Intake Grille Bezels for Polaris RZR PRO XP. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.
Be sure to select color before ordering! -
RZR XP1000 Left Side 3 Switch Dash Panel
Price $40.00This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
-
Rear Brake Caliper Yamaha Rhino 700
Price $89.99Brand new with 1 Year Warranty, 50 Caliber Racing Rear Brake Caliper assembly for the Yamaha Rhino YXR 700. Select to purchase Left, Right or both as a pair to replace the factory Rear Brake Caliper for your Rhino. They come fully assembled including Pads with mounting bracket as a complete and direct replacement for Part numbers: 5B4-2580V-00-00 and 5B4-2580W-00-00.
-
Polaris RZR XP1000 and S 900 Front Bumper RZR4
Price $209.99Custom Front Bumper for Polaris RZR XP1000 and S 900
When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.
Fits the following Polaris models:
- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018) -
12 x 1.25 mm Chrome Spiked Lug Nuts - 16 Pack
Price $50.0016 Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 12 x 1.25mm Thread Pitch
Be sure to select color before ordering!. -
- On sale!
Tie Rod End Kit Yamaha Raptor YFM660 ATV
Price $14.50Tie Rod End Kit for Yamaha Raptor YFM660 ATVs
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits. -
XP1000 6 Switch Dash Panel (Only) Red
Price $159.996 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
-
- On sale!
- Out-of-Stock
12x7 Beadlock wheel 4x110 .190 4/3 polished
Price $99.00Discontinued
- 12x7 Beadlock wheel
- 4x110mm pattern
- 4/3 offset
- 6061 heat treated aluminum
- 190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11 lbs -
- Out-of-Stock
Triple clamps for stock Honda xr & crf50
Price $0.00Triple clamps for stock Honda 50 Forks. 2" risers.
DISCONTINUED
-
-
- Out-of-Stock
50 Caliber complete plastics kit
Price $50.00Full Aftermarket Plastic Kit
Honda xr50(2002+)Honda crf50 (all years)
On sale for limited time! Blow out item!This is a complete plastics kit with all pieces needed. There are lots of plastic kits out there now with no fork leg covers. This kit includes every piece you need to replace stock plastics.
-
- Out-of-Stock
.50 Caliber Extended Swingarms Kit 2
Price $350.00DISCONTINUED
Kit 2 Comes with everything in kit 1 except a shock. This kit comes with an 800 pound Eibach spring that can be used with a 50caliber shock, Ishock, or almost any other 10 1/2 - 11 1/2" eye to eye shock. Please check to make sure spring with fit your shock if its not listed above. Spring dimensions = inner diameter is 32.5mm and total length is 7 1/4 inches.
-
-
Black Billet Twist Throttle
Price $29.99Black 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50, Z50, Pit Bikes, and Motorcycles bar. We have 4 different colors to choose from.
-
Sway Bar Link Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $88.99Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 1/2" Chromoly Heim - 1" OD...
Price $49.99Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
12 Way Standard LED Circuit Screw Fuse Block
Price $31.9912 Way Standard LED Circuit Screw Fuse Block with Ground Terminals
This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.