Best sellers
-
-
sprocket 420 15 tooth 20mm
Price $15.0015 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.
-
2 inch LED Pod Lights
Price $99.992 inch LED Pod Lights
50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury. -
"Cooling Fans" On/Off Rocker Switch Waterproof Sexy...
Price $21.9950 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Cooling Fans"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering! -
RZR XP Turbo Laser Cut Steel Side Intake Grilles
Price $149.9950 Caliber Racing CNC Laser Cut Side Intake Grilles for Polaris RZR XP Turbo / Turbo S 2017-up. Laser cut from 22 gauge sheet steel, with a two tone powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Available in Red, White, or Clear over Raw powdercoat with Black accent panel.
Be sure to select color and kit size before ordering! -
Can-Am X3 Front Bumper
Price $199.99Front Bumper for Can-Am X3 2016-2021+
Protect your Can-Am with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabbed for a 2 or 3" led pod light, and rubber end caps. 100% made in the USA by 50 Caliber Racing. -
Chromoly Uniball Cups with Snap Ring
Price $25.9950 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering! -
RZR PRO XP 4 Rear Bump Seat & Safety Harness
Price $339.99Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering! -
RZR PRO XP Billet Air Intake Bezels
Price $129.99Custom CNC Billet Air Intake Grille Bezels for Polaris RZR PRO XP. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.
Be sure to select color before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...
Price $42.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...
Price $40.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...
Price $54.99Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
2019+ RZR XP1000 & Turbo Front Bumper
Price $209.99Custom Front Bumper for Polaris RZR XP1000 2019+, XP Turbo (does not fit Turbo S)
Protect your RZR with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabs for 11" Elite light bar, and CNC machined end caps.
Be sure to choose color before ordering! -
XP1000 Sprague Carrier with Rollers & Clips
Price $209.99Hardened 7075 Aluminum Sprague Carrier Complete with Rollers & Clips - RZR XP1000
Polaris used plastic sprague carrier cages on many models, and they just do not hold up for most drivers. Replace your broken carrier with a 7075 hardened aluminum roller cage. Our heavy duty aluminum cages come complete with clips and rollers and will take all the abuse you can dish out.
Make sure you select the correct part number before ordering! -
Teryx Wheel Spacer 4x137 1.5 inch 12x1.25 Stud
Price $54.5050 Caliber Racing 4x137mm 12x1.25mm Thread Pitch 1.5" Thick Wheel Spacer - Kawasaki Teryx
Need some more clearance or a wider stance for your Teryx? Designed to fit the all Kawasaki Teryx 2 and 4 door models. Available in various widths so you can get the exact fit for your specific needs.
Price is for one wheel spacer -
Polaris RZR XP900 800 570 4 Switch Dash Panel Black
Price $45.00Black 4 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP900. This panel allows you to add additional switches for lights and accessories. Dash Panel ONLY, Switches not included. Made in the USA!
-
RZR XP1000 Left Side 3 Switch Dash Panel
Price $40.00This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
-
Bullet Racing Shift Knob for RZR
Price $59.9950 Caliber Racing CNC Bullet Shifter Knob for RZR
Give your RZR a unique look with our custom CNC milled shift knob with 50 Caliber Racing logo. Designed to look like a 45mm anti-aircraft shell casing, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA. Make sure to select the model and color from the drop downs so it ads the correct item in the cart. -
Polaris RZR XP1000 and S 900 Front Bumper RZR4
Price $209.99Custom Front Bumper for Polaris RZR XP1000 and S 900
When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.
Fits the following Polaris models:
- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018) -
Yamaha Rhino 50 Inch Curved LED Light Bar Bracket Combo
Price $289.00LED Light Bar Mounting Bracket COMBO for Yamaha Rhino - Includes Brackets and 50" Curved (Radius) LED Light Bar