50cal 271 High Strength RED Bolt Glue 50ml bottle high strength threadlocker. This is a bolt glue by 50 Caliber Racing. Its purpose is to keep your nuts and bolts together! Its excellent for engines or any nuts and bolts that get vibration. If you are tired of nuts and bolts rattling lose this is your solution!
Heavy duty Sway Bar End Links for Polaris RZR PRO R 2 & 4 seat models. CNC Machined in the USA from solid 6061 billet aluminum and fitted with chromoly PTFE heim joints. These links are as stout as it gets. If you want a bulletproof set up for your RZR, you need these end links! Choose front or rear position. Available in raw aluminum or black powdercoat finish.
Be sure to choose location and finish before ordering!
50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Rocker Design
"Rock Lights"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering!
Genuine OEM Polaris Primary Drive Clutch part number 2211626. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts. Replaces OEM part #s: 1327153, 1327152. This clutch includes spring and weights, tuned specifically for 2021 RZR XP Turbo / Turbo S models only.
Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.
Be sure to select color before ordering!
Custom CNC Billet Air Intake Grille Bezels for Polaris RZR XP1000. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.
OEM Polaris Primary Clutch 2021-2022 RZR Pro XP and Pro XP4
Current OEM Polaris Part number 1327322 and replaces the following:
1323769, 1323853.
Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your RZR a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using existing hardware and adding one extra bolt. For 2 seat models only.
Custom Rear Bumper for Polaris RZR XP1000, XP Turbo 2019+
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering!
Solid Steel Extended Spike Lug Nuts - 3/8"-24 Thread Size - Right Hand Thread - Fits Polaris ATV and UTVs
Heat treated, hardened steel lug nuts with 3.5" extended spikes for Polaris ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Comes as a set of 16 lug nuts, with several colors to match any color scheme.
Be sure to select color before ordering!
Heavy Duty Tie Rod Kit for Polaris S 900, S 1000 & General (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
LED Light Bar Mounting Brackets for Polaris General 2 & 4 Seat Models
Bolt on brackets allow you to brow mount a 50 Caliber Racing 40" LED light bar on your Polaris General UTV. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Purchase brackets only or as a combo with a 40" LED light bar of your choice.
Be sure to choose a lighting option before ordering!
Universal 10 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories
Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
Can-Am Maverick Max Radius Roll Cage with lowered seat mounts. More info below or call us at 702-889-1741 to discuss the details.
Bed Mount Clamp on Spare Tire Carrier Mount for RZR XP1000
A spare tire is essential, especially when you are off road. This high strength tubular steel mount clamps directly to the 1.75 inch diameter roll cage cross bar above the bed on your 2 or 4 seat RZR XP1000. 100% made in the USA.
RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).
Be sure to select finish before ordering!
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete Lime Squeeze kit that includes all 3 panels and 4 additional rocker switches
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories giving you an awesome colorful custom look. Made in the USA!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
