Active filters
- Size: 16"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 9000 Lumens - 6000k
- FREE 50 Caliber Koozie with Each light bar order!
50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
HID replacement Protective plastic Lens cover 7 inch
**DISCONTINUED**
- 12x7 Beadlock wheel
- 4x137mm pattern
- 4/3 offset
- 6061 heat treated aluminum
-.190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11 lbs
**DISCONTINUED**
- 12x10 Beadlock wheel
- 4x137mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 10.5 lbs
Note ** Discontinued.
- 12x10 Beadlock Wheel
- 4x110mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
- 12x8 Beadlock Wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 11.7 lbs
DISCONTINUED
50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers
SFI Approved 2" and 3" 5 Point Harness, Racing Harness
50 Caliber Racing Harness 2" and 3" 5 Point Harness are designed with a quick release latch system and are SFI approved for racing.
Can-am X3 Shock Mount LED Light Bar Kit with 11" Elite Series LED Bar
A-Pillar Pod Light Mount Brackets for Polaris RZR 170
A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.
Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!
This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
XP900 Roll Cage LED Light Bar Mount Rack and 30" LED light bar COMBO
DISCONTINUED
Includes mount and light bar. Bolts on to factory cage for 2 or 4 seat models.
Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)
50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles
Price is for a single wheel spacer.
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
DISCONTINUED
- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat
Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for a complete system.
Be sure to select lighting option before ordering!
