Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits upper & lower a-arms on both sides. Ready to install and get your machine back on the trail. Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867.

OEM Factory Replacement Primary Clutch for Polaris Ranger RZR 900  2015-2019

Genuine OEM Factory Polaris Part number 1323130

Polaris 2017-2018 RZR Cover Clutch

Custom CNC Billet Air Intake Grille Bezels for Polaris RZR XP1000.  Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.

Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Custom Rear Bumper for Polaris RZR XP1000, XP Turbo 2019+

Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.

Be sure to choose color before ordering!

Universal 10 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

This is a 1 Piece Bottom Center Dash Panel for the the 2017 Polaris RZR XP1000 Ride Command Edition.

RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).

Be sure to select finish before ordering!

Custom CNC Billet Aluminum 4 Switch Dash Panel

Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA!

40" LED Light Bar Mounting Brackets for Arctic Cat Wildcat

Clamp on brackets allow you to mount a 40" Curved LED light bar on your Arctic Cat Wildcat. USA made from 1/8" steel plating with a gloss black powdercoat finish. These brackets will bolt directly onto your factory cage and give you more than enough lumens to light up your life!

3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

This is the complete kit that includes all 3 panels only

50" LED Light Bar Mounting Brackets and 50" Light Bar Combo for Yamaha Viking - Includes mounting brackets and light bar

Clamp on brackets allow you to brow mount a 50" Straight LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. Includes an insanely powerful 50" LED light bar to light up your night time rides.

Safety Harness Mount Brackets for 2015 Can-Am Maverick X DS Standard or Turbo

Finally a 4 point harness solution for your X DS standard or turbo Maverick! These brackets bolt straight to your frame, allowing you to mount 4 and 5 point harnesses.

For Maverick X DS Platform Turbo and Non Turbo models

Discontinued

Radius LED light bar mount system COMBO for 2014-Up Can-Am Maverick / Commander - Includes mount and light bar

Fits the following Can-Am models:

- Commander 800 STD, DPS and XT (2014-up)
- Commander 1000 STD, DPS, XT, XT-P, LTD (2014-up)
- Commander 1000 MAX (2014-up)
- Maverick 1000 STD, XRS, DPS, XMR (2014 - up)

6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!

- Size: 16.5"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 5600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!

50 Caliber Racing - 4 x 115mm with 10 x 1.25mm Wheel Spacer - 1.0 Inch Thickness

Need some more clearance or a wider stance for your ATV? 50 Caliber Racing precision wheel spacers are what you need! Designed to fit hubs with 4 x 115 bolt patterns with 10 x 1.25mm lug size. Available in various widths so you can get the exact fit for your specific needs.

Price is per wheel spacer.