Sprocket 420 13 tooth 20mm
Price
$15.00
13 tooth sprocket fits a 420 chain and has a 20 mm inner shaft hole.
Best sellers
-
-
- On sale!
Sprocket 420 13 tooth 17mm
Price $15.00Steel 13 tooth Sprocket for a 420 chain. The shaft opening size is a 17mm opening to the outside walls. Bolt holes are 34mm center to center. This sprocket will fit atv's, pit, bikes, motorcycles, quads, and many other applications.
-
- New
2" & 3" 4 Point Quick Fit Harness
Price $119.9950 Caliber Racing Quick fit 4/5-Point Harness — Built tough with EZ-adjust hardware for fast, precise adjustments. Ultra Kush padding delivers plush, pressure-free comfort for long sessions on the asphalt, trail, or track. Available in 2" or 3" straps with a wide fit range to suit almost any driver. Race-style latch/pull release and black anodized hardware give you secure, premium performance. Choose 4- or 5-point setups and match your style with colors like Sugar Skulls (Red/Black), Black, Red, Gold, Dark Green, Lime Green, Hot Pink, Bright Orange, or Purple.
-
- New
SFI Approved 2" and 3" 5 point Harness, Racing Harness
Price $119.99SFI Approved 2" and 3" 5 Point Harness, Racing Harness
50 Caliber Racing Harness 2" and 3" 5 Point Harness are designed with a quick release latch system and are SFI approved for racing.
-
High Capacity Ball Joint Polaris RZR XP1000 Turbo RS1
Price $39.99Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits upper & lower a-arms on both sides. Ready to install and get your machine back on the trail. Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867.
-
Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.5"...
Price $144.99Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
2019 RZR XP1000 Pro Race Rear Bumper
Price $269.99Custom Rear Bumper for Polaris RZR XP1000, XP Turbo 2019+
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering! -
KTM 50 Junior Seat
Price $35.0050 Caliber Racing KTM50 Junior Seat
Stock replacement for your KTM50. The seat has a nice firmness to it and a mild grip cover. Comes complete with foam and cover. -
Polaris S 900/1000 & General Heavy Duty Tie Rod Set
Price $219.99Heavy Duty Tie Rod Kit for Polaris S 900, S 1000 & General (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering! -
Ride Command XP1000 1 Piece Dash Panel
Price $55.00This is a 1 Piece Bottom Center Dash Panel for the the 2017 Polaris RZR XP1000 Ride Command Edition.
-
RZR XP1000 8 Switch Dash Panel
Price $244.99This Kit will allow you to mount 8 switches across the dash of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
*When ordering please select if you want to included Switches or add the Bottom Center Dash Panel.
-
RZR XP1000 Tie Rod Set 2015-2017.5 Heavy Duty
Price $229.99RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering! -
Wet Clutch Drum Housing with Fixed Primary Sheave...
Price $149.99Primary Wet Clutch Drum Housing with Fixed Primary Sheave for Yamaha 660 Rhino and Grizzly
Aftermarket replacement primary wet clutch drum housing with fixed sheave for your Yamaha 660 Grizzly or Rhino. Manufactured to OEM spec for an exact fit. All parts come with a warranty and free tech support. -
- On sale!
Front Cage Support Dash Bar for Arctic Cat Wildcat
Price $99.99Front Cage Support Dash Bar for Arctic Cat / Textron Wildcat
50 Caliber Racing over the dash bar provides extra bracing to the front windshield area of your factory cage. 100% hand-built in the USA by 50 Caliber Racing. -
Arctic Cat Wildcat LED Light Bar Mounting Brackets...
Price $110.0040" LED Light Bar Mounting Brackets for Arctic Cat Wildcat
Clamp on brackets allow you to mount a 40" Curved LED light bar on your Arctic Cat Wildcat. USA made from 1/8" steel plating with a gloss black powdercoat finish. These brackets will bolt directly onto your factory cage and give you more than enough lumens to light up your life!
-
XP1000 3 piece Dash Panel Only - White
Price $204.993 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels only
-
Can-Am Maverick 2015 2 Seat X DS Turbo Harness Mounts
Price $109.99Safety Harness Mount Brackets for 2015 Can-Am Maverick X DS Standard or Turbo
Finally a 4 point harness solution for your X DS standard or turbo Maverick! These brackets bolt straight to your frame, allowing you to mount 4 and 5 point harnesses.
For Maverick X DS Platform Turbo and Non Turbo models -
-
Tie Rod End Kit Kawasaki KVF 750 Brute Force
Price $25.00Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits. -
Gas Tank for KTM 50 SX
Price $39.9950 Caliber Racing Gas Tank for KTM 50cc Pit Bikes 2002-Current
High quality OEM exact fit replacement