Active filters
5" Bolt on CNC Billet Aluminum Mirrors that fit 2" tubing. Set of two mirrors for driver side and passenger side.
Roll Cage Harness Bar for 2016 Can-Am Commander 2 Seat UTV
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount driver and passenger 4 point harnesses.
This fits the 2016 Commander models ONLY.
This Kit will allow you to mount 8 switches across the dash of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
*When ordering please select if you want to included Switches or add the Bottom Center Dash Panel.
Heavy Duty Tie Rod Kit for Polaris XP900 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This price is for the bottom center piece only.
RZR XP 1000 Heavy Duty Tie Rod Kit 2014 (fits 2 and 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Custom Rear Bumper for Polaris RZR XP1000
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and 6 durable powdercoat colors to choose from to enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering!
NOTE**
-SEE DESCRIPTION BELOW FOR BOLT SIZE INFORMATION!
50 Caliber Racing Bolt On Intrusion V-Bar for Arctic Cat Wildcat
Protect your Wildcat and your passengers with our bolt on intrusion V-bar. This burly welded steel V-bar provides extra bracing and support for the weakest area of the stock cage. 100% hand-built in the USA by 50 Caliber Racing.
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design -"Boom Box"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Dome Light"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
A-Pillar Pod Light Mount Brackets for Yamaha YXZ1000R
A pillar mounting brackets allow you to mount pod or cube LED light bars on your Yamaha YXZ1000R. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powdercoated black. Fits all YXZ1000R models: 2016-Current.
Radius LED Light Bar Mounting Brackets for Polaris RZR XP1000 and S 900
Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or 2015-Up S 900. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Patented Design
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design "Auxiliary Battery"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat car truck sand rail or UTV!
Be sure to select the correct color before ordering!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Blower"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
Safety Harness Mount - 2015 Can-Am Maverick MAX 4 Seat X DS Standard or Turbo
Finally a 4 point harness solution for your X DS standard or turbo Maverick! The 50 Caliber Racing safety harness bar and brackets bolt straight to your frame and roll cage, allowing you to mount 4 and 5 point harnesses.
For Maverick X DS Platform Turbo and Non Turbo models
50" Curved Light Bar Mounting Brackets for 07-14 Toyota Tundra
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Roof mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
50" Curved Light Bar Mounting Brackets for 09-14 Ford F-150
- Strong, sleek, aerodynamic design
- Mild Steel Construction
- Roof mount
- Includes installation hardware
- Quick easy install
- Designed to fit 50 Caliber Racing 50” Curved LED Light Bar [5045-A12] (not included)
50 Caliber Racing Elite Series 21 inch Combo Beam 120 Watt LED Light Bar
You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Spot Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars. These lights mean business!
- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles
Roll Cage Harness Bar for 2014 Can Am Maverick
Fits the following Can Am models:
- Maverick 1000 STD, XRS, DPS, XMR (2014)
- Maverick 1000 MAX , rear position only (2014)
