OEM Factory Replacement Secondary Clutch for Polaris RZR XP1000 Model Year 2014-2015
Genuine OEM Factory Polaris Part number 1323239
Custom Front Bumper for Polaris RZR XP1000 2019+, XP Turbo (does not fit Turbo S)
Protect your RZR with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabs for 11" Elite light bar, and CNC machined end caps.
Be sure to choose color before ordering!
A-Pillar Pod Light Mount Brackets for Polaris RZR 170
A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR 170. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black.
Available in brackets only or in a combo with 2 or 3" pod lights. Be sure to choose before ordering!
This Dash Panel Kit will allow you to mount 3 additional switches on the left side of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
Custom CNC Billet Aluminum OR Black 4 Switch Dash Panel Only
Looking for a place to add dash switches to your car, truck, SUV, or Side by Side ? Our custom dash panel gives you 4 additional full size switch locations . Available with powder coat finish or raw aluminum. Made in the USA!
XP900 Roll Cage LED Light Bar Mount Rack and 30" LED light bar COMBO
DISCONTINUED
Includes mount and light bar. Bolts on to factory cage for 2 or 4 seat models.
Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)
50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles
Price is for a single wheel spacer.
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
Procom Yamaha Rhino 700 Performance CDI box. This fully reprogrammable high performance ECU is a direct plug-in-&-go type, not a piggyback.
DISCONTINUED
- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
88cc Race head kit for Your Honda 50 or Honda 70. This kit will drastically improve your overall performance on your bike. A stock honda 50 puts around 2.2hp to the ground and this kit will put you between 5.5-6hp to the ground and 30% more to the crank! Kit comes with fully assembled race head, performance cam, 20mm carburetor, and all the other goodies needed to fulfill your need for speed!
50 Caliber Racing Laser Cut Steel 3 Piece Grille Kit for 2022+ RZR PRO R & Turbo R 2 and 4 seat models
Add a unique honeycomb look to your RZR with our custom laser cut steel grille kit. This is a 3 piece design for the entire front end of the car, which transforms the look of your RZR drastically. Featuring a two tone powdercoat finish, this kit includes stainless steel fasteners. If you want to stand out from the crowd this is the grille for you. Available in Red, White, or Clear over Raw with a Black accent panel.
Be sure to select color before ordering!
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat
Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for a complete system.
Be sure to select lighting option before ordering!
Universal 12 Way Covered 12V Circuit Blade Terminal Fuse Box with LED Indicators and Accessories
Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.
This fits the 2016 Commander models ONLY.
Heavy Duty Tie Rod Kit for Polaris XP900 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Polaris Sportsman 500 ATV Top End Cylinder Rebuild Kit
50 Caliber Racing stock bore size replacement kit. Includes all gaskets and components necessary to rebuild your top end. Manufactured to OEM spec, our kits are complete, high quality and will extend the life of your toys for many more years of enjoyment.
440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016
Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.
