5" Bolt on CNC Billet Aluminum Mirrors that fit 2" tubing. Set of two mirrors for driver side and passenger side. 

Roll Cage Harness Bar for 2016 Can-Am Commander 2 Seat UTV

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount driver and passenger 4 point harnesses.

This fits the 2016 Commander models ONLY.

This Kit will allow you to mount 8 switches across the dash of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.

*When ordering please select if you want to included Switches or add the Bottom Center Dash Panel.

Heavy Duty Tie Rod Kit for Polaris XP900 (fits 2 & 4 seat models)

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

Rubber End caps for Tubing

* Price is for 10 Caps

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

RZR XP 1000 Heavy Duty Tie Rod Kit 2014 (fits 2 and 4 seat models)

Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

50 Caliber Racing Bolt On Intrusion V-Bar for Arctic Cat Wildcat

Protect your Wildcat and your passengers with our bolt on intrusion V-bar. This burly welded steel V-bar provides extra bracing and support for the weakest area of the stock cage. 100% hand-built in the USA by 50 Caliber Racing.

A-Pillar Pod Light Mount Brackets for Yamaha YXZ1000R

A pillar mounting brackets allow you to mount pod or cube LED light bars on your Yamaha YXZ1000R. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powdercoated black. Fits all YXZ1000R models: 2016-Current.

Radius LED Light Bar Mounting Brackets for Polaris RZR XP1000 and  S 900

Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or 2015-Up S 900. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.

Patented Design

Safety Harness Mount - 2015 Can-Am Maverick MAX 4 Seat X DS Standard or Turbo

Finally a 4 point harness solution for your X DS standard or turbo Maverick! The 50 Caliber Racing safety harness bar and brackets bolt straight to your frame and roll cage, allowing you to mount 4 and 5 point harnesses.

For Maverick X DS Platform Turbo and Non Turbo models

50 Caliber Racing Elite Series 21 inch Combo Beam 120 Watt LED Light Bar

You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Spot Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars. These lights mean business!

- ATV and UTV
- 4x4 and Off Road
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response Vehicles

Roll Cage Harness Bar for 2014 Can Am Maverick

Fits the following Can Am models:

- Maverick 1000 STD, XRS, DPS, XMR (2014)
- Maverick 1000 MAX , rear position only (2014)

Clamp-on Roll Cage Harness Bar for 2014 Can-Am Maverick MAX

Fits the following Can Am models:

- Maverick 1000 MAX (2014)

On/Off/On Rocker Switch-  50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications.  These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.

50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design

"Eject A Ho"

High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

Be sure to choose color before ordering!

Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel.  This price is for the bottom center piece only.

11" Elite Seies LED Light Bar 

- Size: 11.25"(L) x 2.7’’(H ) x 3’’(D)

- Operates on 9-36 Volts DC including 12 and 24 Volts
- Spot beam - 6 LED bulbs 60 watts
- Pivoting mounting system
- 6000 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!

Polaris RZR 800 and XP900 Roll Cage. More info below or call us at 702-889-1741 to discuss the details.

These remote control Led Lights are the latest led lights on the market. 

- Size: 42"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Light is Spot Only, Flood Only, or both Spot and Flood Combo
- Remote Control
- California Street Legal
- Pivoting mounting system
- 192 watts total