50 Caliber Racing KTM50 Junior Seat
Stock replacement for your KTM50. The seat has a nice firmness to it and a mild grip cover. Comes complete with foam and cover.
Heavy Duty Tie Rod Kit for Polaris S 900, S 1000 & General (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
OEM Replacement Belt for your 2015+ XP1000. Best of the Best when it comes to a belt for your Polaris RZR!
This is a 1 Piece Bottom Center Dash Panel for the the 2017 Polaris RZR XP1000 Ride Command Edition.
This Kit will allow you to mount 8 switches across the dash of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.
*When ordering please select if you want to included Switches or add the Bottom Center Dash Panel.
RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Primary Wet Clutch Drum Housing with Fixed Primary Sheave for Yamaha 660 Rhino and Grizzly
Aftermarket replacement primary wet clutch drum housing with fixed sheave for your Yamaha 660 Grizzly or Rhino. Manufactured to OEM spec for an exact fit. All parts come with a warranty and free tech support.
Front Cage Support Dash Bar for Arctic Cat / Textron Wildcat
50 Caliber Racing over the dash bar provides extra bracing to the front windshield area of your factory cage. 100% hand-built in the USA by 50 Caliber Racing.
40" LED Light Bar Mounting Brackets for Arctic Cat Wildcat
Clamp on brackets allow you to mount a 40" Curved LED light bar on your Arctic Cat Wildcat. USA made from 1/8" steel plating with a gloss black powdercoat finish. These brackets will bolt directly onto your factory cage and give you more than enough lumens to light up your life!
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels only
Safety Harness Mount Brackets for 2015 Can-Am Maverick X DS Standard or Turbo
Finally a 4 point harness solution for your X DS standard or turbo Maverick! These brackets bolt straight to your frame, allowing you to mount 4 and 5 point harnesses.
For Maverick X DS Platform Turbo and Non Turbo models
Tie Rod End Kit for Kawasaki KFV 750 Brute Force ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
50 Caliber Racing Gas Tank for KTM 50cc Pit Bikes 2002-Current
High quality OEM exact fit replacement
Ignition Coil Assembly for KTM 2002 - 2011 KTM 50cc motorcycles. Complete assembly replaces KTM part # 45139006000.
- Size: 16.5"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood and spot combo beam
- Pivoting mounting system
- 5600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
50 Caliber Racing - 4 x 115mm with 10 x 1.25mm Wheel Spacer - 1.0 Inch Thickness
Need some more clearance or a wider stance for your ATV? 50 Caliber Racing precision wheel spacers are what you need! Designed to fit hubs with 4 x 115 bolt patterns with 10 x 1.25mm lug size. Available in various widths so you can get the exact fit for your specific needs.
Price is per wheel spacer.
These remote control Led Lights are the latest led lights on the market.
- Size: 32"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Light is Large Center Spot Only, Flood Only, or both Spot and Flood Combo
- Removable Black Plastic Cover - California Street Legal Led Light
- Pivoting mounting system
- 158 watts total
- FREE 50 Caliber Koozie with Each light bar order!
These remote control Led Lights are the latest led lights on the market.
- Size: 22"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Light is Spot Only, Flood Only, or both Spot and Flood Combo
- Remote Control Key Chain Fob
- Removable Black Plastic Cover - California Street Legal Led Light
- 132 Watts Total
- FREE 50 Caliber Koozie with Each light bar order
50 Caliber Racing - 4 x 115 Wheel Spacer - 10x1.25 Stud - 2" Thick
CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x115 bolt pattern with 10x1.25mm studs to fit many ATV and UTV models. Includes lug nuts.
Price is for one wheel spacer
