sprocket 420 15 tooth 17mm
Price
$15.00
15 tooth sprocket fits a 420 chain and has a 17 mm inner shaft hole.
Best sellers
Active filters
-
-
sprocket 420 15 tooth 20mm
Price $15.0015 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit atv's pit bikes go karts and many other applications.
-
Rocker Switch On/Off/On Momentary In/Out Winch
Price $16.50On/Off/On Rocker Switch- 50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
-
2 inch LED Pod Lights
Price $99.992 inch LED Pod Lights
50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury. -
"Cooling Fans" On/Off Rocker Switch Waterproof Sexy...
Price $21.9950 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design
"Cooling Fans"
High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.
Be sure to choose color before ordering! -
Can-Am X3 Front Bumper
Price $199.99Front Bumper for Can-Am X3 2016-2021+
Protect your Can-Am with our heavy duty steel bumper. Fully welded construction. Durable powdercoat finish, tabbed for a 2 or 3" led pod light, and rubber end caps. 100% made in the USA by 50 Caliber Racing. -
Chromoly Uniball Cups with Snap Ring
Price $25.9950 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.
Be sure to choose correct size before ordering! -
-
Polaris Inter Cooler 1240930 for RZR XPT Turbo & Pro XP
Price $519.99Brand New Polaris OEM Factory Replacement Inter Cooler 1240930 For Polaris RZR Turbo Models 2016-2021+
-
RZR PRO XP 4 Rear Bump Seat & Safety Harness
Price $339.99Now you can take the whole family on UTV adventures! Upgrade your 4 Seat RZR PRO XP with a seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using including and existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.75" OD...
Price $42.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Single Joint Rod End - 7/8" Chromoly Heim - 1.5" OD...
Price $40.99Single joint rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.5" OD tubing, with wall thickness of .120 or .250. Includes one heim joint, jam nut, and matching bung. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
Sway Bar Link Fab Kit - 3/4" Chromoly Heim - 1.75"...
Price $119.9950 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes two Left and two Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...
Price $54.99Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Main Jet kit for 20mm Carburetor
Price $17.9950 Caliber Racing Main Jet Kit for 20mm Performance Honda 50 Carburetor
Main jet kit designed to fit a 50 Caliber Racing 20mm performance carburetor (part #4211). This kit includes sizes: 82, 85, 87, 90, 92, & 95. The carburetor is equipped with an 89. Will also fit 20mm Keihin carburetors. Get your bike tuned to perfection with our high quality jet kit. -
- On sale!
8 Way Fuse Block - Ring Terminals - LED Indicators
Price $22.99Universal 8 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories
Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits. -
Teryx Wheel Spacer 4x137 1.5 inch 12x1.25 Stud
Price $54.5050 Caliber Racing 4x137mm 12x1.25mm Thread Pitch 1.5" Thick Wheel Spacer - Kawasaki Teryx
Need some more clearance or a wider stance for your Teryx? Designed to fit the all Kawasaki Teryx 2 and 4 door models. Available in various widths so you can get the exact fit for your specific needs.
Price is for one wheel spacer -
Polaris RZR XP900 800 570 4 Switch Dash Panel Black
Price $45.00Black 4 Switch Billet Aluminum CNC Dash panel upgrade for your RZR 570, 800, or XP900. This panel allows you to add additional switches for lights and accessories. Dash Panel ONLY, Switches not included. Made in the USA!
-
Arctic Cat Wildcat Heavy Duty Tie Rod Set
Price $229.99Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).
Be sure to select finish before ordering! -
RZR XP1000 Rear Bumper 2014-2018
Price $269.99Custom Rear Bumper for Polaris RZR XP1000
Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and 6 durable powdercoat colors to choose from to enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.
Be sure to choose color before ordering!NOTE**
-SEE DESCRIPTION BELOW FOR BOLT SIZE INFORMATION!