Bed Mount Clamp on Spare Tire Carrier Mount for RZR XP1000
A spare tire is essential, especially when you are off road. This high strength tubular steel mount clamps directly to the 1.75 inch diameter roll cage cross bar above the bed on your 2 or 4 seat RZR XP1000. 100% made in the USA.
Carburetor 24mm Honda CB CL SL Models
With the 50 Caliber Racing 24mm Honda Carburetor you can upgrade your bike and you'll be back to riding in no time! This carburetor is for the1970s Vintage Honda Bikes but will also fit other bikes.
RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).
Be sure to select finish before ordering!
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete Lime Squeeze kit that includes all 3 panels and 4 additional rocker switches
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories giving you an awesome colorful custom look. Made in the USA!
Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "420 Leaf"
High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!
Be sure to select the correct color before ordering!
50 Caliber Racing LED lighted whips are super bright and fully adjustable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! Available in 4 and 6 foot lengths.
Be sure to choose length when ordering!
CNC Machined 50 Caliber Racing Six Shooter Gas Cap - Arctic Cat Wildcat / Wildcat 4
High quality billet aluminum gas cap for your Arctic Cat Wildcat / Wildcat 4. Give your machine some attitude with the custom 50 Caliber Racing Six Shooter design. Available in powdercoat or plain aluminum finish. CNC machined in the USA.
Custom Front Bumper for Polaris RZR XP1000 and S 900
When you take your RZR off road, anything can happen. Protect your RZR with our heavy duty tubular steel bumper. 100% hand-built in the USA by 50 Caliber Racing.
Fits the following Polaris models:
- XP 1000 (2014 - 2018)
- Trail 900 (2015 - 2018)
- High Performance S 900 (2015 - 2018)
- Trail 900 XC (2015 - 2018)
3 piece 6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
This is the complete kit that includes all 3 panels and 4 additional rocker switches
Safety Harness Mount Brackets for 2015 Can-Am Maverick X DS Standard or Turbo
Finally a 4 point harness solution for your X DS standard or turbo Maverick! These brackets bolt straight to your frame, allowing you to mount 4 and 5 point harnesses.
For Maverick X DS Platform Turbo and Non Turbo models
Polaris RZR / RZR4 XP1000 Heavy Duty Sway Bar End Link Kit
- Choose from either BLACK or Raw Aluminum
- 6061 CNC Billet Aluminum
- 1.25" Diameter
- 5/8" 4130 Chromoly Heim Joints
- Extreme Duty
- Fits Both 2 and 4 Seat Models
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
50 Caliber Racing - 4 x 115mm with 10 x 1.25mm Wheel Spacer - 1.0 Inch Thickness
Need some more clearance or a wider stance for your ATV? 50 Caliber Racing precision wheel spacers are what you need! Designed to fit hubs with 4 x 115 bolt patterns with 10 x 1.25mm lug size. Available in various widths so you can get the exact fit for your specific needs.
Price is per wheel spacer.
Elite Series 5.5 inch LED Bar with Flood Beam
- Dimensions: 6.75"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood beam - 12 LED bulbs 3 watt each 36 watts total
- Pivoting mounting system
- 3600 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
3" Elite Series LED Light Bar
- Size: 3"(L) x 2.7’’(H ) x 3’’(D)
- Operates on 9-36 Volts DC including 12 and 24 Volts
- Flood beam - 6 LED bulbs 3 watt each 18 watts total
- Pivoting mounting system
- 1800 lumens, 6000k
- FREE 50 Caliber Koozie with Each light bar order!
50 Caliber Racing - 4 x 115 Wheel Spacer - 10x1.25 Stud - 2" Thick
CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x115 bolt pattern with 10x1.25mm studs to fit many ATV and UTV models. Includes lug nuts.
Price is for one wheel spacer
