Procom Yamaha Rhino 700 Performance CDI box. This fully reprogrammable high performance ECU is a direct plug-in-&-go type, not a piggyback.
DISCONTINUED
- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
88cc Race head kit for Your Honda 50 or Honda 70. This kit will drastically improve your overall performance on your bike. A stock honda 50 puts around 2.2hp to the ground and this kit will put you between 5.5-6hp to the ground and 30% more to the crank! Kit comes with fully assembled race head, performance cam, 20mm carburetor, and all the other goodies needed to fulfill your need for speed!
On/Off/On Rocker Switch- 50 Caliber Racing On/Off Rocker Switch - This rocker switch is a 20 amp switch and can be used for 12 or 24 Volt applications. These are completely waterproof and can be used in UTV's, Boats, Cars, Trucks, Sand Rails, as well as any other vehicle.
50 Caliber Racing CNC Laser Cut Side Intake Grilles for Polaris RZR XP Turbo / Turbo S 2017-up. Laser cut from 22 gauge sheet steel, with a two tone powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Available in Red, White, or Clear over Raw powdercoat with Black accent panel.
Be sure to select color and kit size before ordering!
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat
Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for a complete system.
Be sure to select lighting option before ordering!
5" Bolt on CNC Billet Aluminum Mirrors that fit 2" tubing. Set of two mirrors for driver side and passenger side.
Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.
This fits the 2016 Commander models ONLY.
Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).
Be sure to select finish before ordering!
Polaris Sportsman 500 ATV Top End Cylinder Rebuild Kit
50 Caliber Racing stock bore size replacement kit. Includes all gaskets and components necessary to rebuild your top end. Manufactured to OEM spec, our kits are complete, high quality and will extend the life of your toys for many more years of enjoyment.
440cc Big Bore Kit with 89mm Piston for Honda XR400R / TRX400EX 1996- 2016
Bolt on 89mm 440cc Big Bore Kit for all Honda TRX400ex and XR400 models. This is a complete kit, with everything you need to rebuild your top end.
Wet Clutch Assembly for Yamaha Rhino and Grizzly 660
Fully assembled replacement wet clutch. Ready to install and get your machine back on the trail.
Fits the following Yamaha models:
- Rhino YXR 660 (2004-2007)
- Grizzly YFM 660 (2002-2008)
LED Light Bar Mounting Bracket COMBO for Yamaha Rhino - Includes Brackets and 50" Straight LED Light Bar
50 Caliber Racing - 6 x 135mm Wheel Spacer - Ford 6 Lug 1999-2014
- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
RZR XP 900 Heavy Duty Radius Rod Kit (fits both 2 and 4 seat models)
- Solid 6061 CNC Billet Aluminum
- 1.25" Diameter
- 5/8" Chromoly Heim Joints
- CNC engraved Logo on the lower rods only
- Lifetime Warranty on Rods (1 Year warranty on heims)
- Extreme Duty
Available in Raw (no finish) or Black Powdercoat Finish
Be sure to select color and heim joint option before ordering!
Tie Rod End Kit for Suzuki LT250 ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
