RH Flanged Threaded Through Weld In Bung - 1.25" .095 Round with 1/2" x 20 Threads

Fits in 1.25" .095 tubing

Thread: 1/2" x 20
Overall Length: 1"
Flange Diameter: 1.25"

Mild Steel Material

50 Caliber Racing -  5 x 4.5 (5 x 114.3 metric) Wheel Spacer

- Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

Be sure to choose bearing size before ordering!

50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

- Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths

Price is for a single wheel spacer.

Please choose size and quantity before ordering

50 Caliber Racing Steel Weld In Bung.

Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

Be sure to select the quantity before ordering!

Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

Be sure to select kit size and color before ordering!

Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"

Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

12 Way Standard LED Circuit Screw Fuse Block

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

2 Inch LED Pod Light - 50 Caliber Racing

50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

Solid Steel Extended Spike Lug Nuts - 9/16"-18 Thread Size

Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

Be sure to select kit size and color before ordering!

Brand new with 1 Year Warranty, 50 Caliber Racing single piston Rear Brake Caliper assembly for your Honda ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads plus assembly hardware shown, however the bracket is not included so you're required to use your current caliper mounting brackets with this Caliper.

Split Collar Tube Clamp 11/16" Wide 1.75" I.D. - for Fabricating Bolt-on Accessories

Tube clamp for adding on after thought accessories, weldable steel split collar tube clamp. CNC machined for accurate fit with protective oil coating that can be directly welded on. 

* Price is for one clamp

50 Caliber Racing 12V Wire Harness Kit with Relay and Switch

Universal 12 Volt wire harness kit complete with 40 amp relay, fuse and On/Off switch. This kit will allow you to safely connect a LED Light Bar, Fog Light, Lighted Whip, Pod Lights, or any other 12 volt accessories to your vehicle.

Solid Steel 3.5 Inch Extended Spike Lug Nut - Singles

Heat treated, hardened steel lug nuts with 3.5" extended spikes for your ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.

Be sure to choose thread size, color and quantity before ordering!

6 Way Standard LED Circuit Blade Fuse Box aka Power block

This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Cooling Fans"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing 6 Switch Slim Touch Control Panel for 12v Accessories

6 extra large on/off touch buttons in a slim 4" x 3 1/8" flat panel that will mount to any flat surface. 40 custom labels including our patented sexy switch designs. Perfect for use in cars, trucks, utvs, marine/boats, RVs, campers and other 12V applications!

50 Caliber Racing Billet Wheel Spacer - 5 x 4.75 Inch (5 x 120.65 metric) Wheel Spacer

Need some more clearance or a wider stance for ride? 50 Caliber Racing precision CNC milled wheel spacers are what you need! Designed to fit many vehicles, these are perfect for fixing clearance issues, installing wider tires and increase vehicle stability. 

Price is for a single wheel spacer.

Please choose size and quantity before ordering

Vintage Stage 1 88cc Big Bore kit (52mm bore)

- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.

Solid Steel Extended Spike Lug Nuts - 12x1.5mm Thread Size

Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.

Be sure to select kit size and color before ordering!