Home

Best sellers

Active filters

  • Availability: In stock
  • Categories: Automotive
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
  • 20mm replacement premium grade carburetor for honda 50 big bore engines

    High Quality 20mm Carburetor for Honda 50 Big bore...

    Price $60.00

    Premium Grade 20mm Performance Aftermarket Carburetor for Honda 50 Pit Bikes with 88cc Big Bore Engines!

    Intake throat diameter: 20mm
    Bolt hole spacing: 48mm
    Air filter mount diameter: 32mm

    Fits:
    - Honda 50 XR50 CRF50 XR70 CRF70 (Sized for 88cc - up Big Bore modified engine. Not recommened for stock engines)
  • GOLD - Hard Anodized in multiple colors

    Pit Bike Rims 12 Inch 32 Hole

    Price $0.00

    50 Caliber Racing Pit Bike 12 inch Rims - 32 Hole

    High quality 6061 Aluminum Pit Bike Rims with 32 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits CRF and XR 50 Pit Bikes, and anything else that requires a 12 inch wheel with 32 spokes.
  • Illuminated On/Off Rocker Switch Roof Lights Blue

    Illuminated On/Off Rocker Switch Roof Lights

    Price $16.50

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Roof Lights"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!
  • Pair of Misalignment Spacers

    High Angle Misalignment Spacers for Heim Joints

    Price $18.99

    High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.

    Be sure to choose the correct size and quantity before ordering!
  • Wheel Spacer 5 x 4.5 Inch - 1in - 2

    5x4.5 Inch Wheel Spacer

    Price $30.00

    50 Caliber Racing -  5 x 4.5 (5 x 114.3 metric) Wheel Spacer

    - Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • 50 Caliber aluminum skid plate

    50 Caliber aluminum skid plate

    Price $35.00

    50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.

    Honda xr50, crf50, and xr70.

     

    NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them. 

     
  • Uniball Bearing Fabrication Kit -Cup, Bearing and snap ring

    Uniball Bearing Fabrication Kit - .5" to 1.5" Bore

    Price $32.99

    50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!
  • Wheel Spacer 6 x 5.5 Inch - 1in - 1

    Wheel Spacer 6 x 5.5 Inch 12mm Stud

    Price $22.00

    50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

    - Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • Left Hand 1"- 1 3/4" Weld In Bungs

    Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!
  • 88cc stage 2 big bore kit for honda xr70 and crf 70

    88cc stage 2 big bore kit for honda xr70 and crf 70

    Price $279.99

    Stage 2 88cc Big Bore kit for Honda xr70 and crf70 all years

    - 20mm Carburetor kit

    - Performance camshaft
    - Lightweight aluminum cylinder with steel sleeve
    - Cast in mounts on cylinder for aftermarket skid plates
    - Oversized cooling fins on cylinder for efficient heat dissipation
    - High compression 52mm piston with rings, pin, & clips (you can still run pump gas)
    - Head gasket kit
  • 14x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat 32 Pack for 8 Lug Trucks - Red

    14x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!
  • Billet Twist Throttle

    Carbon Fiber Billet Twist Throttle

    Price $26.99

    Carbon Fiber 50 Caliber billet twist throttle - Throttle will fit any 7/8" aftermarket bar, the standard size bar in the industry. This throttle will not fit the stock Honda XR50, CRF50,  Z50 Handle Bars. We have 5 different colors to choose from.
  • Right Hand Heim 1/2-20

    Chromoly Heim Joints 1/2" - 7/8" RHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 
  • 12 Way Standard LED Circuit Blade Fuse Box

    12 Way Standard LED Circuit Screw Fuse Block

    Price $24.99

    12 Way Standard LED Circuit Screw Fuse Block

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.