Best sellers

Active filters

  • Availability: Not available
  • Categories: DIY Fabrication Stuff
  • Categories: Honda 50 & Pitbike Parts
    • Out-of-Stock

    Trail Bikes HD Auto Clutch

    Price $85.00

    Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50

    • Out-of-Stock

    Tall Seat for CRF70

    Price $45.00

    50 Caliber tall seat. These will work for 2004-up Honda CRF70. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.

    Fits the following Honda pit bikes:
    XR70  (2002-2003) *must have CRF70 gas tank
    CRF70 (2004-2018)

    • Out-of-Stock

    Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes

    Price $150.00

    This item is not currently in production.


    50 Caliber Racing Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes 1988 - Up

     

    Complete kit allows you to convert your 3 speed semi-auto Honda to a 3 speed manual with clutch. Our kit includes a 3 plate clutch for maximum strength to handle 88c – 108cc big bore kit power without slippage.  This is an awesome way to spice up your big bore Honda 50.

    • Out-of-Stock

    Plastics Kit for KTM 50 SX 2002-08

    Price $65.00

    50 Caliber Racing Red Plastics Kit for KTM 50cc Pit Bikes 2002-2008

    High quality replacement set of plastics. Injection molded, high gloss, and a perfect OEM fit.

    • Out-of-Stock

    Replacement Seat PW80

    Price $45.00

    These will work for all PW80. The seats have a nice firmness to them and a mild grip cover. This is complete with foam and cover.

    Yamaha PW80

    • Out-of-Stock

    .50 Caliber Extended Swingarms Kit 2

    Price $350.00

    DISCONTINUED

    Kit 2 Comes with everything in kit 1 except a shock. This kit comes with an 800 pound Eibach spring that can be used with a 50caliber shock, Ishock, or almost any other 10 1/2 - 11 1/2" eye to eye shock. Please check to make sure spring with fit your shock if its not listed above. Spring dimensions = inner diameter is 32.5mm and total length is 7 1/4 inches.

  • Sway Bar Link Fab Kit - 1/2" Chromoly Heim - 1" OD...

    Price $88.99

    Rod end fabrication kit. 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Panhard Bar Fab Kit - 1/2" Chromoly Heim - 1" OD...

    Price $49.99

    Rod end fabrication kit with 1/2 x 1/2 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • 50 Caliber complete plastics kit

    Price $50.00

    Full Aftermarket Plastic Kit

    Honda xr50(2002+)

    Honda crf50 (all years)
    On sale for limited time! Blow out item!


    This is a complete plastics kit with all pieces needed. There are lots of plastic kits out there now with no fork leg covers. This kit includes every piece you need to replace stock plastics.

    • On sale!
    • Out-of-Stock

    Gasket Head 52mm 110cc-125cc

    Price $10.00

    50 Caliber Racing 52mm Head Gasket Kit for 110cc and 125cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

    • Out-of-Stock

    Honda 50 Improved Tapered Roller Headset Bearings

    Price $30.00

    Out of stock and discontinued

    Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.

  • 4 Link Rod End Kit - 5/8 Chromoly Heim - 1.25 OD Tubing

    Price $159.99

    Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.


    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Panhard Bar Fab Kit - 3/4" Chromoly Heim - 1.75" OD...

    Price $69.99

    50 Caliber Racing rod end fabrication kit with 3/4 x 3/4 chromoly / PTFE liner heim joints, jam nuts, and weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .095 or .120. Includes Left and Right hand thread heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Chromoly Uniball Cups with Snap Ring

    Price $25.99

    50 Caliber Racing heavy duty uniball bearing weld cups are perfect for use in fabricating chassis and suspension components like A-arms and radius rods. Precision machined from 4130 Chromoly steel alloy. Includes a matching spring steel snap ring retainer. Available in several sizes to fit most any off road or race application.

    Be sure to choose correct size before ordering!

  • Panhard Bar Fab Kit - 5/8 Chromoly Heim - 1.25 OD...

    Price $54.99

    Rod end fabrication kit with 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom panhard bar for UTVs, cars, trucks & more. Includes LH and RH heim joint, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

    • Out-of-Stock

    Panhard Bar Fab Kit - 7/8" Chromoly Heim - 1.75" OD...

    Price $82.99

    Rod end fabrication kit featuring 7/8" thread x 7/8" bore chromoly / PTFE heim joints. Fits 1.75" OD tubing, with wall thickness of .120 or .250. Excellent for building a custom panhard bar for cars, trucks, 4x4s & more. Includes heim joints, jam nuts and matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!