Best sellers

Active filters

  • Availability: In stock
  • Categories: Automotive
  • Categories: DIY Fabrication Stuff
  • 5x4.5 Inch Wheel Spacer

    Price $30.00

    50 Caliber Racing -  5 x 4.5 (5 x 114.3 metric) Wheel Spacer

    - Will fit most vehicles with 5 x 4.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Uniball Bearing Fabrication Kit - .5" to 1.5" Bore

    Price $32.99

    50 Caliber Racing heavy duty uniball bearing kit complete with bearing, cup and snap ring. Chromoly cup and bearing with PTFE (nylon/teflon) liner. Perfect for use in fabricating chassis components like A-arms and radius rods. Available in several sizes to fit most any off road or race application.

    Be sure to choose bearing size before ordering!

  • Wheel Spacer 6 x 5.5 Inch 12mm Stud

    Price $22.00

    50 Caliber Racing - 6 x 5.5 Inch (6 x 139.7 metric) Wheel Spacer with 12mm Studs

    - Will fit most vehicles with 6 x 5.5 bolt pattern, see below for more fitment information
    - Available in 1.0, 1.25, 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Left Hand 1"- 1 3/4" Weld In Bungs

    Price $9.99

    50 Caliber Racing Steel Weld In Bung.


    Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread. 

    Be sure to select the quantity before ordering!

  • 14x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 14x1.5mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Chromoly Heim Joints 1/2" - 7/8" RHT MALE

    Price $15.99

    Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Right Hand Thread in 1/2" up to 7/8"


    Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

     

    Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

  • 12 Way Standard LED Circuit Screw Fuse Block

    Price $24.99

    12 Way Standard LED Circuit Screw Fuse Block

    This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

  • 2 inch LED Pod Light

    Price $29.99

    2 Inch LED Pod Light - 50 Caliber Racing

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

  • 9/16 Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $88.99

    Solid Steel Extended Spike Lug Nuts - 9/16"-18 Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 20, 24, and 32 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Tube Clamp 11/16" Wide for 1.75" OD Roll Bar

    Price $27.99

    Split Collar Tube Clamp 11/16" Wide 1.75" I.D. - for Fabricating Bolt-on Accessories

    Tube clamp for adding on after thought accessories, weldable steel split collar tube clamp. CNC machined for accurate fit with protective oil coating that can be directly welded on. 

    * Price is for one clamp

  • 3.5 Inch Spike Lug Nut Singles

    Price $5.75

    Solid Steel 3.5 Inch Extended Spike Lug Nut - Singles

    Heat treated, hardened steel lug nuts with 3.5" extended spikes for your ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.

    Be sure to choose thread size, color and quantity before ordering!

    • On sale!

    12v 6 Piece Fuse power block aka power panel

    Price $20.99

    6 Way Standard LED Circuit Blade Fuse Box aka Power block

    This power block is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

  • Illuminated On/Off Rocker Switch Cooling Fans

    Price $0.00

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Cooling Fans"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • Slim Mount 6 Switch Touch Panel

    Price $74.99

    50 Caliber Racing 6 Switch Slim Touch Control Panel for 12v Accessories

    6 extra large on/off touch buttons in a slim 4" x 3 1/8" flat panel that will mount to any flat surface. 40 custom labels including our patented sexy switch designs. Perfect for use in cars, trucks, utvs, marine/boats, RVs, campers and other 12V applications!

  • 5x4.75 Inch Wheel Spacer 12x1.5mm Studs

    Price $30.00

    50 Caliber Racing Billet Wheel Spacer - 5 x 4.75 Inch (5 x 120.65 metric) Wheel Spacer

    Need some more clearance or a wider stance for ride? 50 Caliber Racing precision CNC milled wheel spacers are what you need! Designed to fit many vehicles, these are perfect for fixing clearance issues, installing wider tires and increase vehicle stability. 

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

    • On sale!

    12x1.5mm Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $58.99

    Solid Steel Extended Spike Lug Nuts - 12x1.5mm Thread Size

    Heat treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Offered in sets of 16, 20, and 24 lug nuts, with several colors to match any color scheme.

    Be sure to select kit size and color before ordering!

  • Illuminated On/Off Rocker Switch Reverse Lights

    Price $0.00

    Illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Reverse Lights"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • 50 Caliber Racing Nautical Star On/Off LED Rocker...

    Price $19.99

     50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

    High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

    Be sure to select the correct color before ordering!

  • 4 Link Rod End Kit - 1/2" Chromoly Heim - 1" OD Tubing

    Price $149.99

    Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.


    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Single Joint Rod End - 5/8 Chromoly Heim - 1.25 OD...

    Price $32.99

    Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!