Vintage Stage 1 88cc Big Bore kit (52mm bore)

- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit.

Yamaha Rhino 686cc Big Bore Kit 2004-2007 (top end cylinder kit)

Bolt on 102mm 686cc Big Bore Kit for all Yamaha Rhino Raptor and Grizzly 660 models. This is a complete bolt on kit with everything you need. Breathe new life into your Yamaha with our high quality, affordable and reliable big bore kit!

 50 Caliber Racing On/Off Rocker Switch with laser etched design - "Nautical Star"

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

Complete 4 link fabrication kit with 1/2 x 1/2 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed specifically for 1" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering!

Yamaha Wolverine 350 Top End Cylinder Kit 1995-2005

Complete top end rebuild kit for your Yamaha Wolverine 350 ATV! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.

50 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Universal 6 Way Covered 12V Circuit Ring Terminal Screw Fuse Box Block with LED Indicators and Accessories

Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

50 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

8 Way Standard LED Circuit Blade Fuse Box

This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.

Yamaha Moto-4 250 Top End Cylinder Kit 1989-2004, YFM250

Complete top end rebuild kit for your Yamaha YFM250 Moto-4, Bear Tracker and Timberwolf ATV. Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.

50 Caliber Racing CDI module for 660 Yamaha Rhino and Grizzly

Our performance CDI module will give you the most bang for your buck. With increased spark energy you will experience easier starting and better throttle response. Removes the speed limiter and increases max revs by 1000 to 7800 RPM. It also will eliminate the reverse rev limiter. Compatible with both standard gauges and Rhino digital dash. Also compatible with factory exhaust and factory intake. Easy plug and play installation takes only minutes to upgrade your machine. 

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Polaris Scrambler 500 Rear Brake Caliper with Pads

50 Caliber Racing Rear Brake Caliper assembly for the 1998-2004 Polaris Scrambler 500 2x4, 4x4 ATV. It comes fully assembled including Pads to replace the factory Brake Caliper for your Scrambler with direct replacement for Polaris Part numbers listed.

Tie Rod End Kit for Yamaha ATVs

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.

Replacement 27mm Carburetor for Honda Fourtrax Recon TRX250

Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.

Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

Heavy Duty 4130 Chromoly Heim Joints with Nylon / PTFE Liner - Male Left Hand Thread in 1/2" up to 7/8"

Heavy duty male threaded heim joint rod ends with nylon / PTFE liner. Made from 4130 Chromoly alloy and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom tie rods and radius arms for UTVs. Includes jam nut. Available in RH or LH thread.

Attn Dealers: Quantity discounts apply to this product in the shopping cart at 2+ and 10+ qty. 

Carburetor for Suzuki LT80 Quadsport ATV

50 Caliber Racing Carburetor for the Suzuki Quadsport LT80. Why bother with trying to rebuild your old Carb when you could buy a replacement to upgrade your ATV saving you time and money... you'll be back to riding in no time!

Tie Rod End Kit for Yamaha Raptor YFM660 ATVs

High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.