- Out-of-Stock
Best sellers
Active filters
-
-
- Out-of-Stock
Honda 50/70 High Performance Carburetor and Intake Kit
Price $105.00High Performance 20mm Carburetor and Intake Kit for 50cc/70cc Honda 50/70. This carb should be used on big bore engines, 88cc-125cc.
-
Single Joint Rod End - 5/8 Chromoly Heim - 1.25 OD...
Price $32.99Single rod end kit including a 5/8 x 5/8 chromoly heim joint with nylon/teflon liner, jam nut, and chromoly steel weld in bung tube adapter. Designed specifically for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building custom sway bar links, tie rods and radius arms for UTVs, and more. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness, thread direction and misalignment spacer options before ordering! -
- Out-of-Stock
Chinese Pit Bike Heavy Duty Spokes 10" Rim
Price $23.00Chinese spokes - Fits 1 - 10" wheel. Works on most Chinese pit bike models.
-
Aluminum Inline Fuel Filter 1/4" Flanges
Price $14.99High Flow Aluminum Body Inline Fuel Filter with 1/4" Flanges
-
- Out-of-Stock
88cc stage 1 Vintage big bore kit for honda z50,...
Price $155.00Vintage Stage 1 88cc Big Bore kit (52mm bore)
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit. -
- Out-of-Stock
Gas Tank Yamaha PW80 Pit Bike
Price $40.0050 Caliber Racing Gas Tank for Yamaha PW80 Pit Bikes All Years
-
- Out-of-Stock
Extended Swing Arm - Silver
Price $179.99.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
-
4 Link Rod End Kit - 3/4" Chromoly Heim - 1.5" OD...
Price $179.9950 Caliber Racing 4 link rod end fabrication kit with 3/4 x 3/4 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Sway Bar Link Fab Kit - 5/8 Chromoly Heim - 1.25 OD...
Price $104.9950 Caliber Racing rod end fabrication kit. 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bungs. Designed specifically for 1.25" OD tubing with wall thickness of .095 or .120. Excellent for building custom sway bar end links for UTVs, cars, trucks & more. Includes two LH and RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
Honda CRF & XR 50 Aluminum Rims
Price $44.9950 Caliber Racing Pit Bike 10 inch Rim for Honda CRF & XR 50
High quality 6061 Aluminum Pit Bike Rims with 28 spoke holes. Select your color to purchase, available in BLACK, GOLD, RED or BLUE Anodized. Fits Honda CRF and XR 50 motorcycles -
- Out-of-Stock
88cc stage 1 big bore kit for honda for xr and crf 70
Price $155.00Stage 1 88cc Big Bore kit for Honda xr and crf 70's. Fits all years
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (can still run pump gas)
- Head gasket kit includes all gasket needed to install bore kit. -
- Out-of-Stock
20mm Carburetor for 88cc to 125cc engines
Price $40.0020mm Carburetor for 88cc big bore engine on Honda 50's. This will also fit many pitbikes up to 125cc.
-
- Out-of-Stock
.50 Caliber Extended Swingarms Kit 1
Price $499.00DISCONTINUED
Fits Honda xr50 and crf50 and many chinese Pit Bikes
This is our new 3+ swingarm. We call it the big bike swingarm because thats what will have after you add this. Rides incredible compared to stock style swingarms and delivers 9 inches of wheel travel. This is the biggest bang for the buck when it comes to swingarms for your 50.
-
- Out-of-Stock
Trail Bikes HD Auto Clutch
Price $85.00Honda Trail Bikes Heavy Duty Auto Clutch kit. This clutch is a great improvement to your stock clutch. We recommend this kit with any upgraded/big bore motor. The stock clutch is designed for a stock motor and that's that. If you want reliablilty and power this is a must have performance upgrade. Fits 1992 to current year models. z50, xr50, and crf50
-
4 Link Rod End Kit - 7/8" Chromoly Heim - 1.75" OD...
Price $269.99Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
- Out-of-Stock
Tall Seat for CRF70
Price $45.0050 Caliber tall seat. These will work for 2004-up Honda CRF70. The seats have a nice firmness to them and a mild grip cover. Comes complete with foam and cover.
Fits the following Honda pit bikes:
XR70 (2002-2003) *must have CRF70 gas tank
CRF70 (2004-2018) -
- Out-of-Stock
Extended Swing Arm - Black
Price $185.99.50 Caliber extended swingarm extends the bike 2 1/2 inches to allow a more stable ride and upgraded shock. Swingarm comes with a chain slide brake extender and 4 bearings for extra strength. **Also comes with a free chain.**
-
4 Link Rod End Kit - 5/8 Chromoly Heim - 1.25 OD Tubing
Price $159.99Complete 4 link fabrication kit with 5/8 x 5/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel bungs. Designed for 1.25" OD tubing, with wall thickness of .095 or .120. Excellent for building a custom 4 link setup, radius rods, control arms and more. Includes four LH and four RH heim joints, with matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering! -
- Out-of-Stock
Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes
Price $150.00This item is not currently in production.
50 Caliber Racing Manual Clutch Kit for Honda Z50 CRF50 XR50 Pit Bikes 1988 - Up
Complete kit allows you to convert your 3 speed semi-auto Honda to a 3 speed manual with clutch. Our kit includes a 3 plate clutch for maximum strength to handle 88c – 108cc big bore kit power without slippage. This is an awesome way to spice up your big bore Honda 50.