Home

Best sellers

Active filters

  • Categories: ATV Parts & Performance
  • Categories: Automotive
  • Categories: Honda 50 & Pitbike Parts
  • Categories: UTV Performance
  • "Rock Lights" On/Off Rocker Switch Waterproof Rocker Design Red

    "Rock Lights" On/Off Rocker Switch Waterproof Rocker...

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Rocker Design

    "Rock Lights"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!
  • OEM Polaris Primary Clutch 1327152 RZR XP Turbo, Turbo S 2021 ONLY

    OEM Polaris Primary Clutch 2211626 RZR XP Turbo,...

    Price $699.99

    Genuine OEM Polaris Primary Drive Clutch part number 2211626. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts.  Replaces OEM part #s: 1327153, 1327152. This clutch includes spring and weights, tuned specifically for 2021 RZR XP Turbo / Turbo S models only.
  • Billet Rear Grille Bezels for Can-Am X3 - Black Powdercoat Installed

    Billet Rear Grille Bezels Can Am X3 2 and 4 seat models

    Price $129.99

    Custom CNC Billet Aluminum Rear Grille Bezels for 2017+ Can Am X3. Add a unique look to your X3 with our custom billet aluminum rear grilles that fit in the body panel on the rear of the car. CNC machined from 6061 billet aluminum, powdercoated, then relief engraved for an awesome two toned bling effect. Available in several colors.


    Be sure to select color before ordering!
  • Black Air Intake Bezel Polaris RZR XP1000 2014-2018

    Air Intake Bezel Polaris RZR XP1000 2014+

    Price $129.99

    Custom CNC Billet Air Intake Grille Bezels for Polaris RZR XP1000.  Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA.

  • RZR XP1000 Lower Door Skin Inserts - 2 Seater Models

    RZR XP1000 Lower Door Skin Inserts - 2 Seater Models

    Price $125.00

    Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your RZR a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using existing hardware and adding one extra bolt. For 2 seat models only.
  • 2019 RZR XP1000 Pro Race Rear Bumper

    2019 RZR XP1000 Pro Race Rear Bumper

    Price $269.99

    Custom Rear Bumper for Polaris RZR XP1000, XP Turbo 2019+

    Protect your RZR with our heavy duty steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and durable powdercoat finish will protect and enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.

    Be sure to choose color before ordering!
  • 3/8-24 Extended Spike Lug Nuts - 60 Degree Taper Seat - Fits Polaris UTV and ATVs – Red Finish
    • On sale!

    3/8-24 Extended Spike Lug Nuts - 60 Degree Taper Seat

    Price $69.99

    Solid Steel Extended Spike Lug Nuts - 3/8"-24 Thread Size - Right Hand Thread - Fits Polaris ATV and UTVs

    Heat treated, hardened steel lug nuts with 3.5" extended spikes for Polaris ATV or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Comes as a set of 16 lug nuts, with several colors to match any color scheme.

    Be sure to select color before ordering!
  • 50 Caliber Racing Main Jet Kit for 20mm Performance Honda 50 Carburetor - Fits Keihin and others

    Main Jet kit for 20mm Carburetor

    Price $17.99

    50 Caliber Racing Main Jet Kit for 20mm Performance Honda 50 Carburetor

    Main jet kit designed to fit a 50 Caliber Racing 20mm performance carburetor (part #4211). This kit includes sizes: 82, 85, 87, 90, 92, & 95. The carburetor is equipped with an 89. Will also fit 20mm Keihin carburetors. Get your bike tuned to perfection with our high quality jet kit.
  • Polaris S 900/1000 & General Heavy Duty Tie Rod Set

    Polaris S 900/1000 & General Heavy Duty Tie Rod Set

    Price $219.99

    Heavy Duty Tie Rod Kit for Polaris S 900, S 1000 & General (fits 2 & 4 seat models)

     

    Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

    Be sure to specify finish before ordering!
  • Polaris General LED Light Bar Brackets

    Polaris General LED Light Bar Brackets

    Price $39.99

    LED Light Bar Mounting Brackets for Polaris General 2 & 4 Seat Models

    Bolt on brackets allow you to brow mount a 50 Caliber Racing 40" LED light bar on your Polaris General UTV. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Purchase brackets only or as a combo with a 40" LED light bar of your choice.

    Be sure to choose a lighting option before ordering!
  • 10 Way Fuse Block - Ring Terminals - LED Indicators

    10 Way Screw Fuse Block - LED Indicators

    Price $23.99

    Universal 10 Way Covered 12V Circuit Ring Terminal Fuse Box Block with LED Indicators and Accessories

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.
  • Bed Mount Clamp on Spare Tire Mount Polaris RZR XP1000

    Bed Mount Clamp on Spare Tire Mount Polaris RZR XP1000

    Price $144.99

    Bed Mount Clamp on Spare Tire Carrier Mount for RZR XP1000

    A spare tire is essential, especially when you are off road. This high strength tubular steel mount clamps directly to the 1.75 inch diameter roll cage cross bar above the bed on your 2 or 4 seat RZR XP1000. 100% made in the USA.
  • Carburetor 24mm Honda CB CL SL Models

    Carburetor 24mm Honda CB CL SL Models

    Price $69.99

    Carburetor 24mm Honda CB CL SL Models

    With the 50 Caliber Racing 24mm Honda Carburetor you can upgrade your bike and you'll be back to riding in no time! This carburetor is for the1970s Vintage Honda Bikes but will also fit other bikes.
  • Polaris Sportsman 500 550 850 Brake Pads

    Polaris Sportsman 500 550 850 Brake Pads

    Price $29.99

    50 Caliber Racing Brake Pads for the Polaris Sportsman ATV are factory spec semi-metallic pads with Kevlar fibers. Made to perfrom in all terrain conditions, our pads have a higher resistance to heat and other elements making them suitable for general or utility use.
  • RZR XP1000 Tie Rod Set 2015-2016 Heavy Duty

    RZR XP1000 Tie Rod Set 2015-2017.5 Heavy Duty

    Price $229.99

    RZR XP 1000 Heavy Duty Tie Rod Kit 2015-2017.5 (fits 2 & 4 seat models)

    Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).

    Be sure to specify finish before ordering!
  • Rear Brake Caliper for Yamaha Raptor

    Rear Brake Caliper for Yamaha Raptor

    Price $64.99

    Will fit Raptor, Banshee, Blaster and Warrior. Brand new with 1 Year Warranty, 50 Caliber Racing dual piston Rear Brake Caliper assembly for your Yamaha ATV. Includes billet parking brake block off plate which is removeable in order to maintain the use of your existing parking brake. Comes with new Pads, mounting bracket and assembly hardware shown.
  • Arctic Cat Wildcat Heavy Duty Tie Rod Set

    Arctic Cat Wildcat Heavy Duty Tie Rod Set

    Price $229.99

    Heavy duty Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).

    Be sure to select finish before ordering!