Best sellers

Active filters

  • Availability: In stock
  • Availability: Not available
  • Brand: 50 Caliber Racing
    • On sale!

    Sprocket 420 14 tooth 20mm

    Price $15.00

    14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit atvs, pit bikes, and many other applications.

  • Gasket Head 47mm 70cc

    Price $10.00

    50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

  • 2022+ RZR PRO R CNC Billet Radius Rods

    Price $449.99

    Heavy Duty Radius Rod Kit for RZR PRO R  / Turbo R 2022+. Fits both 2 and 4 seat models. Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 3/4" chromoly heim joints. This setup is practically bulletproof. Available in raw or powdercoat finish.

    Be sure to select finish before ordering!

    • Out-of-Stock

    Dzus Tab Plate Kits - Dimpled Center

    Price $25.99

    50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look. 

    Be sure to choose kit size before ordering!

  • Zombie Face On/Off Rocker Switch Waterproof Design

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Design

    "Zombie Face"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!

  • Seat Belt Bypass Plug for CAN-AM Commander, Maverick X3

    Price $14.99

    50 Caliber Racing Seat Belt Bypass Override Plug for Can-Am Commander, Maverick and X3 UTVs 2010+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!

  • Wheel Spacer 8x170mm 14x1.5mm Studs

    Price $46.00

    50 Caliber Racing - 8x170mm Wheel Spacer

    - Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
    - Available in 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering

  • Can-Am X3 LED Light Bar Brackets

    Price $34.99

    50 Caliber Racing LED Light Bar Mounting Brackets for 2016+ Can-Am X3. USA made bolt on brackets allow you to brow mount a 50" straight LED light bar on your Can-am X3. Purchase brackets only or as a combo with a 50" LED light bar.

    Be sure to choose a lighting option before ordering!

  • Honda CT70 ATC70 Standard Bore 47mm Piston Kit

    Price $45.99

    50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.

  • RZR XP Turbo S Hood Bling Panels

    Price $189.99

    50 Caliber Racing Custom Hood Bling Panels for RZR XP Turbo /  Turbo S. Decorative steel panels with a two tone powdercoat finish, designed to install on hood of your RZR. CNC laser cut for a super precision clean look. These panels will give you a unique, awesome, custom touch that you can't get anywhere else. Stainless fasteners included for a quick, easy installation. Available with red/black or clear over raw/black finish.

    Be sure to select color before ordering!

    • Out-of-Stock

    Custom Engine Cover for Can-am X3

    Price $399.00

    DISCONTINUED

    Custom Engine Cover For Can-am X3 2016-2021+. Add engine protection and killer unique style to your X3 with our custom cage. Give your car a different look from everyone else. Covers all of the exposed engine and frame below the plastics in the rear of the machine. Laser cut steel with custom X3 and a 50 Caliber Racing logos. 100% hand-built in the USA.

    Be sure to choose color combination before ordering!

  • Arctic Cat Wildcat Bump Seat with Harness

    Price $269.99

    Upgrade your 2 or 4 seat Wildcat with a 50 Caliber Racing middle seat, made just for kids 60 lbs or less! Designed to mount over the middle bump between stock seats. Quick and easy installation. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from. Front position on 4 seat models bolts right in, 2 Seater and rear of 4 seater models will require the purchase of a harness bar (sold separately).

    Be sure to select harness color before ordering!

  • Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.75"...

    Price $149.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.75" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • Sway Bar Link Fab Kit - 7/8" Chromoly Heim - 1.5"...

    Price $144.99

    Rod end fabrication kit featuring 7/8 x 7/8 chromoly heim joints with nylon/teflon liner, jam nuts, and chromoly steel weld in bung tube adapters. Designed specifically for 1.5" OD tubing, with wall thickness of .120 or .250. Includes two LH and two RH heim joints, with matching bungs. Available with or without high misalignment spacers.

    Be sure to choose tubing wall thickness and misalignment spacer options before ordering!

  • 2020 RZR PRO XP CNC Billet Radius Rods

    Price $349.99

    Heavy Duty Radius Rod Kit for RZR PRO XP 2020+. Fits both 2 and 4 seat models. Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 5/8" chromoly heim joints. This setup is bulletproof. Available in raw or powdercoat finish.

    Be sure to select finish before ordering!

  • Billet Grill with Bumper Notch RZR XP 1000 / Turbo /...

    Price $159.99

    50 Caliber Racing Custom CNC Billet Aluminum Grill with Bumper Notch for RZR XP1000, XP Turbo, Turbo S 2019+ 

    Add a unique look and increased air flow to your RZR with our custom CNC aluminum grill. Designed with a notch to allow for aftermarket front bumper installation. This grill transforms the look of your RZR drastically. If you want to stand out from the crowd this is the grill for you.  Available in several colors.


    Be sure to select color before ordering!

  • 10 Way Blade Fuse Box

    Price $23.99

    Universal 10 Way Covered 12V Circuit Blade Terminal Fuse Box Block with LED Indicators and Accessories

    Universal distribution block, equipped with red LEDs that illuminate when a fuse is blown making it easy to identify blown fuses. Includes an assortment of blade fuses, sticker sheet of labels and mounting screws.
    Perfect for Boats, Cars, Trucks, Jeeps, Hot Rods, Farm Equipment and any other 12V system when adding electrical circuits.

  • KTM 50 Junior Seat

    Price $35.00

    50 Caliber Racing KTM50 Junior Seat

    Stock replacement for your KTM50. The seat has a nice firmness to it and a mild grip cover. Comes complete with foam and cover.

    • On sale!

    10x1.25mm Extended Spike Lug Nuts - 60 Degree Taper...

    Price $69.99

    Solid Steel Extended Spike Lug Nuts - 10x1.25mm Thread Size - Right Hand Thread

    Heat treated, hardened steel lug nuts with 3.5" extended spikes for your car, truck or UTV. Tapered 60 degree acorn tapered seat. Compatible with most aftermarket lug centric wheels, and each kit includes extra long socket key for installation/removal. Comes as a set of 16 lug nuts, with several colors to match any color scheme.

    Be sure to select color before ordering!

    • Out-of-Stock

    Gas Tank for XR70 CRF70

    Price $40.00

    50 Caliber Racing Replacement Gas Tank for Honda XR70 & CRF70 Pit Bikes

    Brand new gas tank for your Honda 70 pit bike. Includes cap and a new petcock valve. Don't waste your time messing around with gluing your cracked, leaking, dirty tank together. Just bolt a new one one, fill it up and ride!